OS / BAT manager:
(00010001)  attempt to free already-freed block
(00010002)  disk is full
(00010003)  attempt to free illegal disk address
(00010004)  BAT not mounted
(00010005)  disk needs salvaging
(00010006)  disk quota exceeded
(00010007)  disk quota table exceeded
(00010008)  disk quota table full

            OS / VTOC manager:
(00020001)  VTOC not mounted
(00020002)  VTOC is bad
(00020003)  no file map
(00020004)  no UID
(00020005)  not found
(00020006)  UID not found
(00020007)  duplicate UID
(00020008)  uid mismatch
(00020009)  only local access allowed

            OS / AST manager:
(00030001)  attempted reference to out-of-bounds address
(00030003)  no replaceable aste's
(00030004)  segment is not deactivatable
(00030005)  write concurrency violation
(00030006)  incompatible request
(00030007)  reference count says unused
(00030008)  segment not found in bst
(00030009)  segment thread error in bst
(0003000A)  only local access allowed
(0003000B)  system object cannot be deleted
(0003000C)  last page partially written

            OS / MST manager:
(00040001)  object not found
(00040002)  invalid length
(00040003)  no space available
(00040004)  reference to illegal address
(00040005)  reference to out-of-bounds address
(00040006)  no asid is available
(00040007)  object is not mapped
(00040008)  no rights
(00040009)  insufficient rights
(0004000A)  guard fault
(0004000B)  wrong type - can't map system objects
(0004000C)  ppn list overflow
(0004000D)  uid mismatch
(0004000E)  virtual memory resources exhausted
(0004000F)  invalid va for install of io page
(00040010)  invalid segment count
(00040011)  asid 0 is illegal for this mapping
(00040012)  specified UID is not for a VM area
(00040013)  asid must be 0 for this mapping
(00040014)  invalid request

            OS / PMAP manager:
(00050001)  not allocated
(00050002)  already allocated
(00050003)  mismatch
(00050004)  bad wire
(00050005)  bad unwire
(00050006)  bad assoc
(00050007)  pages wired
(00050008)  page null
(00050009)  bad disk address
(0005000A)  read concurrency violation
(0005000B)  changed pmods
(0005000C)  invalid pmape
(0005000D)  attempt to map i/o page over real page
(0005000E)  bst threads yielded invalid va
(00050010)  illegal pid argument from dxm callback
(00050011)  illegal wsl index
(00050012)  page sparse

            OS / MMAP manager:
(00060004)  bad avail
(00060005)  bad free
(00060006)  bad unavail
(00060007)  examined max
(00060008)  inconsistent mmape
(00060009)  illegal wsl index
(0006000A)  illegal pid
(0006000B)  ws lists exhsusted
(0006000C)  bad install
(0006000D)  bad reclaim
(0006000E)  contiguous pages unavailable

            OS / MMU manager:
(00070001)  mmu miss
(00070002)  va not in valid mmu manager range
(00070003)  va does not have os_pmap
(00070004)  ptt parity error
(00070005)  pft parity error
(00070006)  mmu timeout
(00070007)  unknown mmu status
(00070008)  mmu parity error
(00070009)  data cache parity error
(0007000A)  unexpected virtual timeout
(0007000B)  write buffer timeout
(0007000C)  bad PPN install request

            OS / disk manager:
(00080001)  disk not ready
(00080002)  disk controller busy
(00080003)  disk controller time-out
(00080004)  disk controller error
(00080005)  disk equipment check
(00080006)  floppy is not 2-sided
(00080007)  disk write protected
(00080008)  bad disk format
(00080009)  disk data check
(0008000A)  DMA overrun
(0008000B)  volume in use
(0008000C)  volume table full
(0008000D)  volume not properly mounted or assigned
(0008000E)  operation requires a physical volume
(0008000F)  invalid volume index
(00080010)  logical volume not found
(00080011)  disk block header error
(00080012)  invalid disk address
(00080013)  disk buffer is not page aligned
(00080014)  invalid logical volume index or list
(00080015)  disk seek error
(00080016)  drive timed out before operation completed
(00080017)  bus error occurred during disk DMA transfer
(00080018)  invalid unit number
(00080019)  unknown status returned by hardware
(0008001A)  invalid physical volume label
(0008001B)  floppy door has been opened or storage module has been stopped
(0008001C)  read after write failed
(0008001D)  dma not at end of range
(0008001E)  disk already mounted
(0008001F)  software detected checksum error
(00080020)  checksum error in read after write
(00080021)  too many wired pages -- storage module manager
(00080022)  disk driver logic error
(00080023)  unknown error status from drive
(00080024)  unrecognized drive id
(00080025)  memory parity error during disk write
(00080026)  unrecognized interrupt from disktape controller
(00080027)  ecc error in sector id field
(00080028)  disk subsystem detected a DC powerfail
(00080029)  transfer not executed
(0008002A)  illegal request for device
(0008002B)  unit attention presented by device
(0008002C)  manufacturing badspot information not available or no needed
(0008002D)  disk striping not yet supported on this device
(0008002E)  queued drivers not yet supported on this disk
(0008002F)  disk operation completed successfully after retry
(00080030)  disk operation completed successfully after crc correction
(00080031)  disk operation completed successfully after device recovery
(00080032)  data check found by ctlr on first mode sense

            OS / eventcount manager:
(00090001)  bad wait list on eventcount

            OS / level 1 process manager:
(000A0001)  illegal process id
(000A0002)  illegal lock
(000A0003)  process not suspended
(000A0004)  process already suspended
(000A0005)  process not bound
(000A0006)  process already bound
(000A0007)  bad atomic operation
(000A0008)  no pcb is available
(000A0009)  no stack space is available
(000A000A)  process not suspendable
(000A000B)  ready list is out of order
(000A000C)  bad deferred interrupt queue

            OS / terminal manager:
(000B0001)  buffer too small
(000B0002)  end of file entered from keyboard
(000B0003)  invalid output length
(000B0004)  invalid option passed to term_$control
(000B0005)  input buffer overrun - characters lost
(000B0006)  asynchronous fault occurred while waiting for input
(000B0007)  invalid line number supplied
(000B0008)  manual stop: type G<ret>G *+2<ret> to continue
(000B0009)  character framing error
(000B000A)  character parity error
(000B000B)  data carrier detect (dcd) changed
(000B000C)  clear to send (cts) changed
(000B000D)  requested line or operation not implemented
(000B000E)  hangup fault
(000B000F)  speed incompatible with partner SIO line

            OS / DBUF manager:
(000C0001)  bad ptr
(000C0002)  bad free
(000C0003)  internal error

            OS / time manager:
(000D0001)  no timer queue entry
(000D0002)  entry to be cancelled not found
(000D0003)  quit while waiting for event
(000D0004)  bad timer interrupt
(000D0005)  bad timer key
(000D0006)  alarm fault
(000D0007)  real interval timer fault
(000D0008)  virtual interval timer fault
(000D0009)  queue element not in use
(000D000A)  queue element not found
(000D000B)  cpu time limit exceeded
(000D000C)  time adjustment out of range
(000D000D)  queue element already in use
(000D000E)  relative time is too large

            OS / naming server:
(000E0002)  directory is full
(000E0003)  name already exists
(000E0004)  invalid pathname
(000E0005)  invalid link
(000E0006)  not a link
(000E0007)  name not found
(000E000A)  invalid link operation
(000E000B)  invalid leaf
(000E000C)  node is unavailable
(000E000D)  bad directory
(000E000E)  branch is not a directory
(000E000F)  directory is not empty
(000E0010)  name is not a file
(000E0011)  illegal directory operation
(000E0012)  bad type
(000E0013)  no rights
(000E0014)  insufficient rights
(000E0015)  unable to delete system bootstrap (sysboot)
(000E0016)  directory is in use (locked)
(000E0017)  name server helpers clocks are skewed
(000E0018)  illegal request made of name server helper
(000E0019)  cannot find entry in replicated root
(000E001A)  last entry in replicated root returned
(000E001B)  name server helper is shutdown
(000E001C)  name server helper sent packet with errors
(000E001D)  clocks skewed
(000E001E)  cant find name server helper
(000E001F)  directory must be root
(000E0020)  directory not found in pathname
(000E0021)  too many components in pathname
(000E0022)  cache entry is stale
(000E0023)  cache entry was stale and was updated
(000E0024)  name server helper is uninitialized
(000E0025)  internal error
(000E0026)  bad request header version
(000E0027)  bad request code
(000E0028)  bad request body version
(000E0029)  request ignored
(000E002A)  directories not neighbors
(000E002B)  directory not local
(000E002C)  pathname truncated
(000E002D)  leaf truncated
(000E002E)  bad buffer size
(000E002F)  object is not an acl object
(000E0030)  volume has been mounted read-only
(000E0031)  write-protected volume prevents recovery of a damaged directory
(000E0032)  too many hard links exist to file
(000E0033)  directory object not found
(000E0034)  ran out of address space
(000E0035)  directory is corrupt

            OS / file server:
(000F0001)  object not found
(000F0002)  object is remote
(000F0003)  bad reply received from remote node
(000F0004)  communications problem with remote node
(000F0005)  object is not locked by this process
(000F0006)  object is in use
(000F0007)  illegal lock request
(000F0008)  lock violation detected
(000F0009)  local lock table is full
(000F000A)  remote lock table is full
(000F000B)  operation cannot be done from here
(000F000C)  no more lock table entries
(000F000D)  volume uid is unavailable
(000F000E)  locking files is blocked for this volume
(000F000F)  locking is already blocked for this volume
(000F0010)  no rights
(000F0011)  insufficient rights
(000F0012)  wrong type - can't operate on system objects
(000F0013)  objects are on different volumes
(000F0014)  invalid argument
(000F0015)  incompatible request
(000F0016)  volume has been mounted read-only
(000F0017)  network request requires new UID protocol

            OS / I/O manager:
(00100001)  controller not found
(00100002)  controller not in system
(00100003)  illegal interrupt id specified
(00100004)  interrupt id already in use
(00100005)  interrupt id not implemented for this bus
(00100006)  interrupt id table full
(00100007)  bad dcte length
(00100008)  illegal unit number
(00100009)  unit not acquired
(0010000A)  unit already in use
(0010000B)  unit table full
(0010000C)  illegal CSR address
(0010000D)  interrupt id already in use
(0010000E)  CSR page already in use
(0010000F)  CSR address already mapped
(00100010)  io map full
(00100011)  device failed self-test
(00100012)  boot device not found
(00100013)  interrupt stack error

            OS / network:
(00110001)  buffer error
(00110002)  out of pages
(00110003)  out of blocks
(00110004)  transmit failed
(00110005)  receive process failed to start
(00110006)  buffer queue is empty
(00110007)  remote node failed to respond to request
(00110008)  unable to route
(00110009)  network hardware error
(0011000A)  msg header too big
(0011000B)  unexpected reply type
(0011000C)  no more free sockets
(0011000D)  unknown request type
(0011000E)  request denied by local node
(0011000F)  request denied by remote node
(00110010)  bad checksum
(00110011)  too many transmit retries
(00110012)  socket not open
(00110013)  receive bus error
(00110014)  transmit bus error
(00110015)  bad asknode version number
(00110016)  memory parity error during transmit
(00110017)  unknown network
(00110018)  too many networks in internet
(00110019)  conflict with another node listing
(0011001A)  quit fault during node listing
(0011001B)  waited too long for more nodes to respond
(0011001C)  data length too large
(0011001D)  operation not defined on network hardware
(0011001E)  header length + data length exceeds max msg size
(0011001F)  no nodeid prom on this system
(00110020)  device stat block is not valid
(00110021)  device stat selection index is out of range
(00110022)  foreign node does not support all network features
(00110023)  attempt to transmit with invalid FROM ID
(00110024)  header data length exceeds max size allowed
(00110025)  extended network service delay
(00110026)  server ran out of queued service buffers

            OS / fault handler:
(00120001)  odd address error
(00120002)  illegal instruction
(00120003)  integer divide by zero
(00120004)  CHK instruction trapped - value out of range?
(00120005)  arithmetic overflow
(00120006)  privileged instruction violation
(00120007)  invalid SVC code
(00120008)  invalid SVC procedure name
(00120009)  undefined TRAP instruction
(0012000A)  unimplemented instruction
(0012000B)  protection boundary violation
(0012000C)  bus time-out
(0012000D)  invalid user stack pointer
(0012000E)  correctable memory error detected
(0012000F)  uncorrectable memory error detected
(00120010)  process quit
(00120011)  access violation
(00120012)  CPU B enabled with MMU valid bit reset
(00120013)  null process running on CPU B
(00120014)  OS-internal quit (with display return)
(00120015)  single step completed
(00120016)  invalid user-generated fault (subsystem code = 0)
(00120017)  fault in user-space interrupt handler for pbu device
(00120018)  process stop
(00120019)  process BLAST
(0012001A)  cache parity error
(0012001B)  PEB WCS parity error
(0012001C)  unimplemented SVC
(0012001D)  invalid stack format
(0012001E)  memory parity error
(0012001F)  process interrupt
(00120020)  supervisor fault while resource lock(s) set
(00120021)  spurious parity error
(00120022)  floating point inexact result (loss of significance)
(00120023)  floating point divide by zero
(00120024)  floating point underflow
(00120025)  floating point operand error
(00120026)  floating point overflow
(00120027)  process suspend fault
(00120028)  process suspend from keyboard
(00120029)  process suspend due to background read
(0012002A)  process suspend due to background write
(0012002B)  process continue fault
(0012002C)  fault(s) lost; process suspended or pfm_$enable/pfm_$inhibit mismatch?
(0012002D)  coprocessor protocol violation
(0012002E)  floating point branch/set on unordered condition
(0012002F)  floating point signalling not-a-number
(00120030)  invalid thread during parity error check
(00120031)  illegal page fault in user gpio interrupt routine
(00120032)  bus error while running on cpu B
(00120033)  spurious interrupt
(00120034)  unexpected bus error during system initialization
(00120035)  cleanup handler set
(00120036)  cleanup handler released out of order
(00120037)  ac power failure
(00120038)  fpx parity error
(00120039)  unknown fpa exception
(0012003A)  VME bus error on bus error
(0012003B)  AT bus parity error -- (I/O channel chk)
(0012003C)  Breakpoint
(0012003D)  Translate Error
(0012003E)  Illegal Lock
(0012003F)  Lock Timeout
(00120040)  Unknown Status
(00120041)  Floating Point Exception
(00120042)  A88K FPU Internal Error: Specific code in FPCSR<6:0>
(00120043)  pause interrupt received by cpu
(00120044)  halt interrupt received by cpu
(00120045)  trap occurred while already in trap mode
(00120046)  unaligned instruction
(00120047)  floating point hardware error -- incorrect data stored to memory
(00120048)  integer processor hardware error -- incorrect data stored to memory
(00120049)  bad bus error frame
(0012004A)  bus time-out during cache push
(0012004B)  AT-bus io-space protection violation
(0012004C)  registers corrupted by a trap handler
(0012004D)  owner trap on already-owned fp lo registers
(0012004E)  owner trap on already-owned fp hi registers

            OS / display driver:
(00130001)  invalid display unit number
(00130002)  specified font not loaded
(00130003)  internal font table full
(00130004)  invalid use of display driver procedure
(00130005)  font too large
(00130006)  error unloading internal (hdmt) table
(00130007)  invalid direction from SM
(00130008)  unexpected BLT in use
(00130009)  internal protocol violation
(0013000A)  too many pages to be wired
(0013000B)  unsupported font version #
(0013000C)  invalid buffer size
(0013000D)  error mapping display memory
(0013000E)  error borrowing display from screen manager
(0013000F)  unable to borrow - display in use
(00130010)  display borrow request denied by screen manager
(00130011)  error returning display to screen manager
(00130012)  can't return - display not borrowed
(00130013)  can't borrow both displays simultaneously
(00130014)  display already borrowed by this process
(00130015)  invalid position argument
(00130016)  invalid window limits argument
(00130017)  invalid length argument
(00130018)  invalid direction argument
(00130019)  invalid scroll displacement argument
(0013001A)  invalid blt mode register
(0013001B)  invalid blt control register
(0013001C)  invalid blt-done interrupt
(0013001D)  invalid interrupt routine state
(0013001E)  invalid screen coordinates in blt request
(0013001F)  font associated with specified id not mapped
(00130020)  display memory is already mapped
(00130021)  display memory is not mapped
(00130022)  quit while waiting
(00130023)  invalid cursor number
(00130024)  hidden display memory is full
(00130025)  quit while waiting
(00130026)  invalid eventcount key
(00130027)  operation not implemented on color display
(00130028)  non-conforming and main memory blts not implemented
(00130029)  invalid DM window id
(0013002A)  acquire denied because window is obscured
(0013002B)  no more direct mode window ID's available
(0013002C)  process not found
(0013002D)  pad/stream operations not allowed while display acquired
(0013002E)  display already acquired
(0013002F)  display acquire timed out
(00130030)  bad tracking rectangle
(00130031)  tracking list full
(00130032)  hidden memory does not exist
(00130033)  device not being used by specified process
(00130034)  process owning shared device has terminated

            OS / volume manager:
(0014FFFF)  Warning: disk is write protected
(00140001)  entry directory problems on logical volume
(00140002)  unable to dismount the boot volume
(00140003)  logical volume is not mounted
(00140004)  entry directory is not on specified logical volume
(00140005)  physical volume replaced since mount
(00140006)  volume table full
(00140007)  directory in use
(00140008)  volume in use for swapping
(00140009)  invalid argument
(0014000A)  end of volume table
(0014000B)  disk quotas not configured
(0014000C)  disk quota table full
(0014000D)  slow access times make volume unsuitable for swap space

            OS / calendar manager:
(00150001)  invalid syntax for date or time specification
(00150002)  date or time specification invalid
(00150003)  an empty string was passed to a decode routine
(00150004)  timezone specified is unknown
(00150005)  invalid time-zone difference

            OS / cross-process debug manager:
(00160001)  locate target spans multiple objects
(00160002)  locate target spans discontiguous segments
(00160003)  invalid state argument
(00160005)  not a debugger
(00160006)  debugger not found
(00160007)  debugger table full
(00160008)  requested state inapplicable to machine type
(00160009)  already a debugger
(0016000A)  target process not found
(0016000B)  no event posted for target - not suspended
(0016000C)  invalid ec key
(0016000D)  locate target has variable mmu access
(0016000E)  state unavailable for this event
(0016000F)  invalid control/inquire option
(00160010)  Mutually exclusive control options
(00160011)  superfluous or illegal target setup
(00160012)  target process is forking
(00160013)  target process is execing a program
(00160014)  target process is invokeing a program
(00160015)  target process is exiting
(00160016)  target process is loading an executable image
(00160017)  target process is vforking
(00160018)  call is ok
(00160019)  target process is unloading an executable image
(0016001A)  obsolete call issued

            OS / deferred execution module manager:
(00170001)  no more deferred execution queue slots
(00170002)  datum too large for deferred execution
(00170003)  wired dxm helper not currently supported

            OS / level 2 eventcount manager:
(00180001)  internal table exhausted
(00180002)  internal error
(00180003)  asynchronous fault occurred while waiting
(00180004)  bad eventcount
(00180005)  unable to allocate level 1 eventcount
(00180006)  level 1 eventcount not allocated

            OS / level 2 process manager:
(00190001)  process not found
(00190002)  not a level two process
(00190003)  bad stack base
(00190004)  request is for current process
(00190005)  suspend request timed out
(00190006)  process not suspended
(00190007)  process already suspended
(00190008)  child process terminated
(00190009)  another fault is pending for this process
(0019000A)  invalid process name
(0019000B)  bad eventcount key
(0019000C)  attempt to complete vfork on non-vforked process
(0019000D)  wait found no children
(0019000E)  process is a zombie
(0019000F)  no entries in level 2 process table
(00190010)  process is not a debug target
(00190011)  process is already a debug target
(00190012)  permission denied
(00190013)  internal error
(00190014)  process is already an orphan
(00190015)  process is a process group leader
(00190016)  another process is using this process group id
(00190017)  attempted to join a process group in a different session
(00190018)  unimplemented parameter passed to get/set_parm
(00190019)  illegal call to proc2_$free_asid

            OS / import/export manager:
(001A0001)  entry directory is not cataloged in the namespace
(001A0002)  files are locked on this volume
(001A0003)  specified entry directory not on this volume
(001A0004)  volume is not mounted

            OS / startup/shutdown:
(001B0001)  node ID mismatch
(001B0002)  checksumming already enabled
(001B0003)  no os paging file -- please run invol option 8
(001B0004)  no calendar on system -- please boot over network
(001B0005)  CPU board below minimum revision level
(001B0006)  undefined interrupt
(001B0007)  cold start error
(001B0008)  system reboot
(001B0009)  exception handler is not longword-aligned
(001B000A)  cpu has unexpected cpu id in vbr reg
(001B000B)  timeout waiting for cpus to start

            OS / vfmt:
(001C0001)  unterminated control string
(001C0002)  invalid control string
(001C0003)  too few arguments supplied for read/decode
(001C0004)  field width missing on "(" designator
(001C0005)  encountered end of string where more text expected
(001C0006)  encountered null token where numeric token expected
(001C0007)  non-numeric character found where numeric was expected
(001C0008)  sign encountered in unsigned field
(001C0009)  value out of range in text string
(001C000A)  character in text string does not match control string
(001C000B)  terminator in text string does not match specified terminator

            OS / circular buffer manager:
(001D0001)  invalid block size requested
(001D0002)  quit while waiting
(001D0003)  buffer wrap-around error

            OS / pbu manager:
(001E0001)  ddf is larger then expected
(001E0002)  ddf has wrong version
(001E0003)  invalid unit number in ddf
(001E0004)  invalid csr page address in ddf
(001E0005)  csr page is in use
(001E0006)  initialization routine not in library
(001E0007)  cleanup routine not in library
(001E0008)  interrupt library too large
(001E0009)  interrupt routine not in library
(001E000A)  pbu not present
(001E000B)  too many pbu manager pages wired
(001E000C)  invalid unit number
(001E000D)  unit in use
(001E000E)  unit not acquired
(001E000F)  unit already acquired
(001E0010)  bad parameter
(001E0011)  no room in iomap
(001E0012)  requested iomap in use
(001E0013)  iomap already allocated
(001E0014)  iomap not allocated
(001E0015)  invalid iova
(001E0016)  buffer too large
(001E0017)  buffer page not wired
(001E0018)  buffer not mapped
(001E0019)  page already wired
(001E001A)  page wired too many times
(001E001B)  page not wired
(001E001C)  reference to csr page caused bus timeout
(001E001D)  trap 6 executed outside of interrupt routine
(001E001E)  invalid trap 6 code
(001E001F)  invalid usp at trap 6
(001E0020)  protection violation
(001E0021)  unexpected interrupt from pbu device
(001E0022)  ddf has wrong file type
(001E0023)  too many wired pages
(001E0024)  csr not in device's csr page
(001E0025)  controller already mapped
(001E0026)  bad controller memory length
(001E0027)  bad buffer address
(001E0028)  interrupt library not found
(001E0029)  device library not found
(001E002A)  device is not a shared controller
(001E002B)  device not mapped
(001E002C)  pbu device got bus timeout on multibus
(001E002D)  all pbu units in use
(001E002E)  wrong version of /lib/pbulib in use
(001E002F)  interrupt level in use
(001E0030)  operation valid only for VME device
(001E0031)  physical address list too small
(001E0032)  function not supported for this device type
(001E0033)  illegal dma channel number
(001E0034)  bad dma direction specified
(001E0035)  requested dma channel in use
(001E0036)  requested dma channel not in use
(001E0037)  dma channel not at end of range
(001E0038)  no more eventcounts available
(001E0039)  eventcount not allocated to this unit
(001E003A)  unit already in use as a global device
(001E003B)  unit is publicly owned
(001E003C)  buffer pages not physically contiguous
(001E003D)  contiguous buffer not page aligned

            OS / line printer module:
(001F0001)  pna board not installed in system
(001F0002)  invalid string length
(001F0003)  invalid string termination
(001F0004)  line printer not acquired
(001F0005)  line printer already acquired
(001F0006)  internal error
(001F0007)  ppn list overflow - internal error
(001F0008)  line printer not assigned
(001F0009)  no line printer on system

            OS / OS info supplier:
(00200001)  array too small for complete table

            OS / badspot manager:
(00210001)  bad checksum in physical badspot block
(00210002)  bad count in physical badspot block
(00210003)  missing minus-one in physical badspot block
(00210004)  badspot list too small
(00210005)  no physical badspot blocks read or written
(00210006)  physical badspot list partially read or written
(00210007)  duplicate entry in badspot list
(00210008)  no physical badspot information on disk
(00210009)  bad daddr for lv label badspot extension block
(0021000A)  too many extensions to lv badspot list
(0021000B)  badspot extension uid <> logical volume uid
(0021000C)  manufacturer badspot list is corrupt
(0021000D)  illegal physical badspot list address specified

            OS / magtape manager:
(0022FFFE)  warning: tape not at load-point
(0022FFFF)  warning: tape unit is offline
(00220001)  invalid mt unit number
(00220002)  invalid mode field
(00220003)  invalid buffer length
(00220004)  invalid parameter
(00220005)  no PNA board installed in system
(00220006)  magtape unit is not connected
(00220007)  magtape not acquired
(00220008)  magtape unit is not ready
(00220009)  unit will not fit thru 25" hatch
(0022000A)  magtape unit in use
(0022000B)  magtape not initialized
(0022000C)  magtape already acquired
(0022000D)  invalid option
(0022000E)  too many outstanding operations
(0022000F)  invalid buffer address
(00220010)  invalid count for erase or space operation
(00220011)  tape drive is hung
(00220012)  ppn list overflow - internal error
(00220013)  config page in use - internal error
(00220014)  release problems - internal error
(00220015)  unexpected interrupt
(00220016)  operation attempted before waiting
(00220017)  wait attempted before go issued
(00220018)  go command issued while not in batch mode
(00220019)  header or buffer misalignment on chained r/w
(0022001A)  user quit while in mt_$wait
(0022001B)  timeout during wait or release
(0022001C)  header buffer not on header page
(0022001D)  no room from mt_$write - internal error
(0022001E)  info array (passed to mt_$wait) too small
(0022001F)  too many pages wired
(00220020)  too many pbu devices in use
(00220021)  buffer already wired
(00220022)  buffer not wired

            OS / ACL manager:
(00230001)  no right to perform operation
(00230002)  insufficient rights to perform operation
(00230003)  exit_super called more often than enter_super
(00230004)  wrong type - operation illegal on system objects
(00230005)  entry already exists
(00230006)  ACL is remote
(00230007)  ACL is on different volume than object
(00230008)  ACL protects wrong type of object
(00230009)  insufficient address space to open ACL
(0023000A)  required entry may not be deleted
(0023000B)  no entry - entry number too large
(0023000C)  image buffer too small or incorrect size
(0023000D)  ACL object not found
(0023000E)  ACL would be unchangeable
(0023000F)  object may not be readable by backup procedure
(00230010)  no right to set subsystem data or subsystem manager
(00230011)  project list is full - no more entries may be added
(00230012)  project list is too big - it cannot be added to object
(00230013)  ACL is full - no more entries may be added
(00230014)  Unused ACL status code
(00230015)  Unused ACL status code
(00230016)  Unused ACL status code
(00230017)  Unused ACL status code
(00230018)  Unused ACL status code
(00230019)  Unused ACL status code
(0023001A)  Unused ACL status code
(0023001B)  required entry missing from ACL
(0023001C)  attempt to issue unimplemented ACL call
(0023001D)  invalid selection for required entry
(0023001E)  invalid required entry
(0023001F)  may only setid to required entry
(00230020)  may not use setid in a default acl
(00230021)  invalid right supplied
(00230022)  extra field already in use - funky ACL's can't use

            OS / PEB manager:
(00240001)  fpu is hung
(00240002)  PEB interrupt
(00240003)  floating point overflow
(00240004)  floating point underflow
(00240005)  divide by zero
(00240006)  floating point loss of significance
(00240007)  floating point hardware error
(00240008)  attempted use of unimplemented opcode
(00240009)  wcs verify failed

            OS / network logging manager:
(00250001)  ppn list overflow

            OS / color display manager:
(00260001)  illegal caller
(00260002)  too many wired pages
(00260003)  virtual address not page aligned in color_$map
(00260004)  pages unmapped out of order
(00260005)  parameter value out of range
(00260006)  color display not available
(00260007)  instruction queue done wait timed out

            OS / vme bus manager:
(00270001)  undefined vme interrupt
(00270002)  vme bus error
(00270003)  ubus error caused by vme bus
(00270004)  iomap parity error
(00270005)  timeout on vme bus
(00270006)  bad request to enable routine
(00270007)  bad IO virtual addr specified

            OS / cartridge tape manager:
(0028FFFA)  warning: tape in write mode
(0028FFFB)  warning: tape in read mode
(0028FFFC)  warning: tape not at load-point
(0028FFFD)  tape at load point
(0028FFFE)  warning: tape unit is offline
(0028FFFF)  tape power on/reset
(00280001)  invalid ct unit number
(00280002)  unit not acquired
(00280003)  unit already acquired
(00280004)  unit in use
(00280005)  no tape controller on system
(00280006)  invalid buffer length
(00280007)  bad buffer alignment
(00280008)  invalid buffer address
(00280009)  unrecognized action type
(0028000A)  invalid operation count
(0028000B)  unit not ready
(0028000C)  unexpected ct interrupt
(0028000D)  quit waiting for i/o
(0028000E)  timeout waiting for i/o
(0028000F)  too many wired pages
(00280010)  no cartridge in drive
(00280011)  drive does not exist
(00280012)  tape is write protected
(00280013)  end of tape
(00280014)  read/write abort
(00280015)  read block error
(00280016)  read filler error
(00280017)  read no data
(00280018)  read no data and end of tape
(00280019)  read no data and load point
(0028001A)  filemark detected
(0028001B)  illegal drive command
(0028001C)  marginal block detected
(0028001D)  unrecognized drive status
(0028001E)  dma not at end of range
(0028001F)  dma underrun/overrun
(00280020)  memory parity error during dma
(00280021)  illegal controller command
(00280022)  controller timeout
(00280023)  controller diagnostic failed
(00280024)  unrecognized controller status
(00280025)  operation already in progress
(00280026)  operation not in progress

            OS / msg manager:
(00290001)  socket out of range
(00290002)  too deep
(00290003)  socket error
(00290004)  no more sockets
(00290005)  not owner
(00290006)  too much data
(00290007)  socket empty
(00290008)  socket in use
(00290009)  time out
(0029000A)  quit fault
(0029000B)  allocation failure

            OS / symbolic link manager:
(002A0001)  file not symbolic link type
(002A0002)  bad symbolic link file

            OS / internet routing:
(002B0001)  network port not open
(002B0002)  buffer queue for user port is full
(002B0003)  unknown network port
(002B0004)  can not create/delete that port type
(002B0005)  max number of ports already open
(002B0006)  routing service type not recognized
(002B0007)  port belongs to another process
(002B0008)  routing through-traffic queue overflow
(002B0009)  operation not legal on this port type
(002B000A)  unknown network device type
(002B000B)  no more buffer queues for user networks
(002B000C)  user network checksum failed
(002B000D)  bad packet length from user network
(002B000E)  unable to create through-traffic queue
(002B000F)  max number of USER ports already open
(002B0010)  bad request type asking for service change
(002B0011)  routing not allowed at port with 0 network ID

            OS / internet interface controller:
(002C0001)  IIC: dma got multibus read timeout error
(002C0002)  IIC: not initialized prior to operation
(002C0003)  IIC: transmitter underrun error
(002C0004)  IIC: undocumented interrupt raised
(002C0005)  IIC: hardware reset operation timed out
(002C0006)  IIC: self test failure reported by board init
(002C0007)  device already acquired
(002C0008)  device not acquired
(002C0009)  operation aborted
(002C000A)  device not in system
(002C000B)  remote device not acquired
(002C000C)  could get expected packet from receive socket
(002C000D)  could not allocate receive socket for device
(002C000E)  never got expected command completion interrupt
(002C000F)  wrong board revision level
(002C0010)  invalid command control block
(002C0011)  invalid receive control block

            OS / graphics processor manager:
(002D0001)  device not present in system
(002D0002)  device not available
(002D0003)  package not initialized
(002D0004)  package already initialized
(002D0005)  device not ready for PIO
(002D0006)  device timeout
(002D0007)  wait terminated by process fault
(002D0008)  error condition reported by GPU
(002D0009)  page fault interrupt
(002D000A)  illegal values for physical page use limits
(002D000B)  Programmed I/O command error
(002D000C)  DMA command execution error
(002D000D)  buffer already wired
(002D000E)  buffer too large
(002D000F)  no GPU microcode loaded
(002D0010)  error reported by draw processor

            OS / DMA manager:
(002E0001)  illegal channel
(002E0002)  illegal byte count
(002E0003)  channel in use
(002E0004)  channel not allocated for operation
(002E0005)  operation did not finish

            OS / IEEE 802.3:
(002F0001)  internal driver error
(002F0002)  feature is not implemented
(002F0003)  driver version mismatch
(002F0004)  device is off-line
(002F0005)  device is already on-line
(002F0006)  adapter hardware error
(002F0007)  transmit operation failed
(002F0008)  invalid unit number
(002F0009)  illegal packet length
(002F000A)  invalid statistics block
(002F000B)  packet type is already in use
(002F000C)  no channels are available
(002F000D)  no packet available for receive
(002F000E)  invalid packet type
(002F000F)  channel is not open
(002F0010)  address is not a multicast
(002F0011)  multicast list is full
(002F0012)  address is a multicast
(002F0013)  packet type is not already in use
(002F0014)  illegal destination address
(002F0015)  bad received packet

            OS / audit trail manager:
(00300001)  invalid data size
(00300002)  file already open
(00300003)  excessive event types
(00300004)  event logging is disabled
(00300005)  this process is not being audited
(00300006)  event type is not being audited
(00300007)  invalid action code
(00300008)  permission to perform action is denied
(00300009)  attempted to perform a redundant action
(0030000A)  could not start event logging
(0030000B)  file not open
(0030000C)  could not find audit event list
(0030000D)  not configured
(0030000E)  event logging already started
(0030000F)  event logging already stopped
(00300010)  event list format is not the current version
(00300011)  audit logging is enabled
(00300012)  could not locate audit directory

            OS / Ring:
(00310001)  feature is not implemented
(00310002)  invalid controller unit number
(00310003)  illegal header length
(00310004)  illegal data length
(00310005)  transmit operation failed
(00310006)  no packet available to receive
(00310007)  packet type is already in use
(00310008)  no channels are available
(00310009)  invalid svc packet type
(0031000A)  channel is not open
(0031000B)  device is off-line
(0031000C)  device is already on-line
(0031000D)  internal driver error
(0031000E)  controller hardware error
(0031000F)  packet type is not already in use
(00310010)  driver version mismatch
(00310011)  invalid statistics block
(00310012)  illegal destination address

            OS / Areas:
(00320001)  no free areas
(00320002)  area in use
(00320003)  cannot grow shared area
(00320004)  illegal area grow request
(00320005)  no free resources
(00320006)  area not active
(00320007)  not owner of area
(00320008)  cannot unmap area
(00320009)  no deactivatable pmaps
(0032000A)  internal error
(0032000B)  bad reserve

            OS / utility bus manager:
(00330001)  undefined interrupt
(00330002)  bus error interrupt
(00330003)  bus timeout
(00330004)  no response from gate array
(00330005)  error during interrupt cycle

            OS / pc/at bus manager:
(00340001)  undefined interrupt
(00340002)  bus error interrupt
(00340003)  pc/at bus-generated ubus error
(00340004)  iomap parity error
(00340005)  iocheck asserted on pc/at bus
(00340006)  pc/at bus refresh timeout
(00340007)  invalid request
(00340008)  invalid iova
(00340009)  invalid length
(0034000A)  pc/at bus not present
(0034000B)  no iomap present
(0034000C)  no dma channels present
(0034000D)  requested dma channel in use
(0034000E)  requested dma channel not in use
(0034000F)  dma not at end of range
(00340010)  illegal dma channel

            OS / terminal handler:
(00350001)  invalid option
(00350002)  invalid value for special function character
(00350003)  invalid handle
(00350004)  supplied buffer is too small
(00350005)  end of file
(00350006)  invalid output buffer length
(00350007)  quit while waiting for input
(00350008)  get conditional failed - no data available
(00350009)  input buffer overrun
(0035000A)  put conditional failed - no room for data
(0035000B)  timeout expired

            OS / serial I/O:
(00360001)  invalid option
(00360002)  illegal parameter value
(00360003)  invalid handle
(00360004)  character framing error
(00360005)  character parity error
(00360006)  data carrier detect (dcd) changed
(00360007)  clear to send (cts) changed
(00360008)  incompatible speed request
(00360009)  input buffer overrun
(0036000A)  quit while waiting

            OS / Ring 802.5:
(00370001)  internal driver error
(00370002)  feature is not implemented
(00370003)  driver version mismatch
(00370004)  device is off-line
(00370005)  device is already on-line
(00370006)  adapter hardware error
(00370007)  transmit operation failed
(00370008)  invalid unit number
(00370009)  illegal frame length
(0037000A)  invalid statistics block
(0037000B)  frame type is already in use
(0037000C)  no channels are available
(0037000D)  no frame available for receive
(0037000E)  invalid frame type
(0037000F)  channel is not open
(00370010)  frame type is not already in use
(00370011)  illegal destination address
(00370012)  size of receive buffer less than received frame
(00370013)  adapter is not open

            OS / SCSI manager:
(00380001)  SCSI bus not present
(00380002)  bad handle passed in call
(00380003)  device in use
(00380004)  device not acquired
(00380005)  device already acquired
(00380006)  bad parameter
(00380007)  buffer too large
(00380008)  page not wired
(00380009)  page already wired
(0038000A)  too many wired pages
(0038000B)  bad length
(0038000C)  bad buffer address
(0038000D)  unsupported function
(0038000E)  invalid iova
(0038000F)  device already allocated
(00380010)  operation timeout
(00380011)  hardware timeout
(00380012)  hardware failure
(00380013)  internal manager error
(00380014)  quit fault received during wait
(00380015)  all devices in use
(00380016)  illegal bus revision
(00380017)  protection violation
(00380018)  no resources available
(00380019)  command in progress
(0038001A)  DMA overrun
(0038001B)  DMA underrun
(0038001C)  parity error
(0038001D)  illegal command
(0038001E)  illegal data direction
(0038001F)  scsi target disconnected
(00380020)  scsi target not available
(00380021)  no such operation
(00380022)  host selected by another initiator
(00380023)  scsi bus reset detected
(00380024)  host illegally reselected
(00380025)  unknown message sent to host
(00380026)  illegal scsi bus phase
(00380027)  target is not a system device
(00380028)  illegal system device command
(00380029)  system device is busy
(0038002A)  ddf is larger then expected
(0038002B)  ddf has wrong version
(0038002C)  ddf has wrong file type

            OS / XNS Error Protocol:
(00390001)  source is broadcast address
(00390002)  illegal buffer specification
(00390003)  packet type error
(00390004)  cannot open to XNS IDP

            OS / MAC-independent interface:
(003A0001)  port operation not implemented
(003A0002)  no channels available
(003A0003)  packet type table full
(003A0004)  invalid packet type
(003A0005)  packet type in use
(003A0006)  no OS sockets available
(003A0007)  caller specified neither OS socket nor demux proc
(003A0008)  channel is not open
(003A0009)  no socket allocated for caller
(003A000A)  no packet available to receive
(003A000B)  data capacity too small for received packet
(003A000C)  illegal buffer specification
(003A000D)  invalid port version number
(003A0010)  could not put packet into socket
(003A0011)  invalid port number
(003A0012)  invalid type count
(003A0013)  illegal destination address

            OS / XNS IDP:
(003B0001)  no channels available
(003B0002)  no OS sockets available
(003B0003)  caller specified neither OS socket nor demux proc
(003B0004)  channel is not open
(003B0005)  no socket allocated for caller
(003B0006)  no packet available to receive
(003B0007)  data capacity too small for received packet
(003B0008)  illegal buffer specification
(003B0009)  address in use
(003B000A)  invalid type count
(003B000B)  listen network not connected
(003B000C)  illegal IDP socket
(003B000D)  IDP socket table full
(003B000E)  IDP socket in use
(003B000F)  OS socket not open
(003B0010)  no client for packet
(003B0011)  bad IDP checksum
(003B0012)  maximum hops exceeded by packet
(003B0013)  network unreachable
(003B0014)  illegal OS socket
(003B0015)  invalid version number
(003B0016)  could not put packet into socket
(003B0017)  no OS socket depth given
(003B0018)  cannot send only as well as listen
(003B0019)  cannot send only as well as connect
(003B001A)  cannot connect to broadcast address
(003B001B)  connection source address must be this node
(003B001C)  cannot connect as well as listen
(003B001D)  host address table full

            OS / Routing Information Protocol:
(003C0001)  network unreachable
(003C0002)  cannot open to XNS IDP

            OS / Apollo-private Protocol:
(003D0001)  could not put packet into socket

            OS / System Bus Manager:
(003E0001)  undefined interrupt
(003E0002)  unknown interrupt ID

            OS / Kernel Memory Allocator:
(003F0001)  internal error
(003F0002)  already allocated
(003F0003)  already free
(003F0004)  allocation failure

            OS / Thread Manager:
(00400001)  thread not found
(00400002)  thread termination in progress
(00400003)  bad thread state
(00400004)  thread not suspended
(00400005)  thread interrupted
(00400006)  thread info structure provided is too small
(00400007)  thread stop request timed out
(00400008)  thread stop requested while inhibited in user space

            OS / Recovered Disk Error Manager:
(00410001)  disk error recovered by device retry
(00410002)  disk error recovered by device crc
(00410003)  disk error recovered by some device action
(00410004)  disk error recovered by some OS action

            OS / Autochanger Manager:
(00420001)  attempt to use too many autochangers
(00420002)  autochanger did not return status page
(00420003)  surface not found in autochanger
(00420004)  transport is full
(00420005)  drive is missing a scsi address
(00420006)  ac drive is on a different bus
(00420007)  two drives have the same SCSI address
(00420008)  drive and ac controller have same SCSI address
(00420009)  medium has no source
(00420010)  invalid drive address
(00420011)  invalid drive bus
(00420012)  medium in drive has no source
(00420013)  autochanger jammed
(00420014)  invalid drive state in get_valid_surface
(00420030)  impossible case in calculate_scheduling_method
(00420031)  AC_DELAY and sreqp busy
(00420032)  deleting a non existant sreqq
(00420033)  deleting empty sreqq
(00420034)  bad drive state
(00420035)  all drives busy in get_drive
(00420036)  move and transport not busy
(00420037)  illegal operation in call_op
(00420038)  bad scheduling result
(00420039)  error in process_op
(00420040)  error in process_op recovery
(00420041)  error with memory allocation in init_req
(00420042)  error in init_sreq
(00420043)  drive spinup failed
(00420044)  user issued an illegal move
(00420045)  internal error: illegal error switch in dinit
(00420046)  internal error: continue for real error
(00420047)  internal error: illegal error switch in open_autochanger
(00420048)  internal error: illegal error switch in open_ac
(00420049)  an optical drive in the autochanger failed during OS initialization
(00420050)  hog time must exceed wait time
(00420051)  interrupt detected during operation
(00420052)  wait/hog time can not be negative
(00420053)  unknown autochanger control command
(00420054)  the system does not contain an autochanger

            OS / EISA bus Manager:
(00430001)  undefined interrupt
(00430002)  invalid iova
(00430003)  eisa bus not present
(00430004)  illegal dma channel
(00430005)  invalid dma count
(00430006)  requested dma channel in use
(00430007)  requested dma channel not in use
(00430008)  dma not at end of range
(00430009)  unsupported function
(0043000A)  internal error

            OS / DIO bus Manager:
(00440001)  undefined interrupt
(00440002)  invalid iova
(00440003)  invalid length
(00440004)  invalid argument
(00440005)  too many defined interrupts
(00440006)  internal error
(00440007)  hardware error
(00440008)  dio bus not present
(00440009)  unhandled interrupt
(0044000A)  dma not at end of range
(0044000B)  requested dma channel in use
(0044000C)  requested dma channel not in use
(0044000D)  dma address rolled over
(0044000E)  dma alignment error
(0044000F)  dma channel halted by reset
(00440010)  dma control changed during operation

            OS / Parallel Printer Interface:
(00450001)  parallel printer interface not present
(00450002)  device already acquired
(00450003)  invalid buffer length
(00450004)  bad handle in call
(00450005)  bad paramater in call
(00450006)  timeout waiting for device
(00450007)  async fault detected
(00450008)  internal manager error
(00450009)  spurious interrupt
(0045000A)  transfer error
(0045000B)  device timeout caused interface to be reset
(0045000C)  command not supported on this hardware
(0045000D)  bad buffer address
(0045000E)  end of read data stream

            OS / Kernel object manager:
(00460001)  internal error
(00460002)  object table full
(00460003)  unable to initialize
(00460004)  object kind mismatch

            OS / External Pager:
(00470000)  internal error
(00470001)  unimplemented function
(00470002)  timed out waiting for pager
(00470003)  invalid argument
(00470004)  access denied
(00470005)  out of resources
(00470006)  object not mapped
(00470007)  protocol mismatch
(00470008)  external pager already runniing
(00470009)  recursive external operation

            OS / FDDI Driver:
(00480001)  internal driver error
(00480002)  feature is not implemented
(00480003)  driver version mismatch
(00480004)  device is off-line
(00480005)  device is already on-line
(00480006)  adapter hardware error
(00480007)  transmit operation failed
(00480008)  invalid unit number
(00480009)  illegal frame length
(0048000A)  invalid statistics block
(0048000B)  frame type is already in use
(0048000C)  no channels are available
(0048000D)  no frame available for receive
(0048000E)  invalid frame type
(0048000F)  channel is not open
(00480010)  receive frame ignored: greater that 4500 bytes?
(00480011)  client's buffers too small for packet
(00480012)  fddi f/w file not found
(00480013)  the mac specified by client is WRAPPED
(00480014)  the mac specified by the client does not exist
(00480015)  the command queue to the controller is full

            OS / Queued file service:
(00490000)  Slow file service OK
(00490001)  Queue memory allocation error
(00490002)  Queued file service has not been enabled
(00490003)  Unable to allocate queue structures



            Streams Modules:
(0101xxxx)  stream manager / open
(0102xxxx)  stream manager / create
(0103xxxx)  stream manager / get_rec
(0104xxxx)  stream manager / get_prior_rec
(0105xxxx)  stream manager / seek
(0106xxxx)  stream manager / create_here
(0107xxxx)  stream manager / truncate
(0108xxxx)  stream manager / put_rec
(0109xxxx)  stream manager / replace
(010Axxxx)  stream manager / put_chr
(010Bxxxx)  stream manager / close
(010Cxxxx)  stream manager / delete
(010Dxxxx)  stream manager / inquire
(010Exxxx)  stream manager / redefine
(010Fxxxx)  stream manager / open_rec
(0110xxxx)  stream manager / pad_create
(0111xxxx)  stream manager / memory manager
(0112xxxx)  stream manager / get_conditional
(0113xxxx)  stream manager / internal module
(0114xxxx)  stream manager / get_ec
(0115xxxx)  stream manager / internal module get_fcb.sfcb
(0116xxxx)  stream manager / internal module get_fcb.pfcb
(0117xxxx)  stream manager / fork
(0118xxxx)  stream manager / dup
(0119xxxx)  stream manager / get_buf
(011Axxxx)  stream manager / alloc_sh_sk
(011Bxxxx)  stream manager / free_sh_sk
(011Cxxxx)  stream manager / init_sh_sk_pool
(011Dxxxx)  stream manager / bypass
(011Exxxx)  stream manager / force_write
(011Fxxxx)  stream manager / get_xp_buf
(0120xxxx)  stream manager / open_xp_buf
(0121xxxx)  stream manager / pad_init
(0122xxxx)  stream manager / replicate
(0123xxxx)  stream manager / force_unlock
(0124xxxx)  stream manager / switch
(0125xxxx)  stream manager / dump
(0126xxxx)  stream manager / get_uid
(0127xxxx)  stream manager / IOS
(0128xxxx)  stream manager / advisory_lock
(0129xxxx)  stream manager / sfcb

            Streams codes:
(01xxFFF8)  warning: new name added but cannot set protection
(01xxFFF9)  warning: a full record was not available
(01xxFFFA)  warning: supplied buffer too small
(01xxFFFB)  warning: new name added but cannot delete old name
(01xxFFFC)  warning: fix lgth recs & partial rec at EOF
(01xxFFFD)  warning: close anomaly
(01xxFFFE)  inquire warning - object open on multiple streams
(01xxFFFF)  warning: file trouble flag is set
(01xx0000)  unused
(01xx0001)  operation attempted on unopened stream
(01xx0002)  attempted operation illegal on this stream
(01xx0003)  "from" stream not open on switch request
(01xx0004)  no available target stream for switch
(01xx0005)  can't switch - no available stream ids
(01xx0006)  can't open stream to this object type
(01xx0007)  no more available streams
(01xx0008)  requested object is in use
(01xx0009)  end of file
(01xx000A)  ran out of address space
(01xx000B)  permanent files must have names
(01xx000C)  "put" of wrong length record
(01xx000D)  internal fatal error; table re-verify failed
(01xx000E)  file already exists
(01xx000F)  operation illegal with variable length records
(01xx0010)  unused
(01xx0011)  attempt to seek beyond beginning of file (key=0?)
(01xx0012)  character seek outside of current record
(01xx0013)  bad import - must be already open on stream elsewhere
(01xx0014)  count field for current record is in error
(01xx0015)  name not found
(01xx0016)  bad stream file header - checksum doesn't check
(01xx0017)  bad location parameter in create call
(01xx0018)  inquire error - can't open stream to this type of object
(01xx0019)  object already open on another stream by a different name
(01xx001A)  stream id out of range
(01xx001B)  unused
(01xx001C)  object not found even though name exists
(01xx001D)  unused
(01xx001E)  unused
(01xx001F)  attempted name change would require file move
(01xx0020)  object deleted while open on this stream
(01xx0021)  name required - open with no name is illegal
(01xx0022)  EOF pad put error - "put" legal only at EOF on pads
(01xx0023)  bad related pad - invalid or not open
(01xx0024)  unable to lock needed resources
(01xx0025)  this object type is illegal for pad create
(01xx0026)  internal memory management error - fatal
(01xx0027)  attempted write to read only stream
(01xx0028)  replace length error; record size cannot change
(01xx0029)  cannot redefine this attribute for a pad
(01xx002A)  manager cannot inquire/redefine one of the requested attributes
(01xx002B)  illegal attempt to open stream to remote device
(01xx002C)  no access rights to object
(01xx002D)  insufficient rights to object
(01xx002E)  invalid data in write to pad
(01xx002F)  internal table space error
(01xx0030)  move mode is needed - forced locate is on
(01xx0031)  illegal forced locate request - legal only for disk files
(01xx0032)  no more shared file cursors available on this node
(01xx0033)  internal error: shared file cursor has bad reference count (below zero)
(01xx0034)  internal error: export buffer too small
(01xx0035)  parameter combination illegal for this stream operation
(01xx0036)  couldn't find directory in pathname
(01xx0037)  system (or process) crash prevented complete file close
(01xx0038)  no stream found in conditional inquire
(01xx0039)  cannot open a remote sio line
(01xx003A)  cannot create file through a link
(01xx003B)  specified DSEE version does not exist
(01xx003C)  object is read-only
(01xx003D)  put conditional failed - no room for data
(01xx003E)  get conditional failed - no data available
(01xx003F)  not at record boundary
(01xx0040)  cannot change type as requested
(01xx0041)  opened for inquire only - operation failed
(01xx0042)  file not empty
(01xx0043)  buffer too big for object of this type
(01xx0044)  cannot initialize object of this type
(01xx0045)  flag not supported for this object type
(01xx0046)  advisory lock already set on this object
(01xx0047)  no advisory lock to unlock
(01xx0048)  not a directory
(01xx0049)  deadlock detected
(01xx004A)  file size limit exceeded
(01xx004B)  attempted read from write only stream
(01xx004C)  unused
(01xx004D)  unused
(01xx004E)  unused
(01xx004F)  unused
(01xx0050)  unused
(01xx0051)  unused
(01xx0052)  unused
(01xx0053)  unused
(01xx0054)  unused
(01xx0055)  unused
(01xx0056)  unused
(01xx0057)  unused
(01xx0058)  unused
(01xx0059)  unused
(01xx005A)  unused
(01xx005B)  unused
(01xx005C)  unused
(01xx005D)  unused
(01xx005E)  unused
(01xx005F)  unused
(01xx0060)  unused
(01xx0061)  unused
(01xx0062)  unused
(01xx0063)  unused
(01xx0064)  unused
(01xx0065)  char seek outside of current record illegal
(01xx0066)  unused
(01xx0067)  unused
(01xx0068)  unused
(01xx0069)  inquire for this object type not implemented



            display manager / DM process:
(02010001)  Command syntax error
(02010002)  Unknown command name
(02010003)  Too many command arguments
(02010004)  Position specification syntax error
(02010005)  Key definition incomplete
(02010006)  File not found
(02010007)  Unable to access file
(02010008)  Text is read-only
(02010009)  No text under cursor
(0201000A)  Too many windows
(0201000B)  Too many pads
(0201000C)  Display manager internal error #1
(0201000D)  Unable to write new file
(0201000E)  You must finish current command input request before making another
(0201000F)  Key definition too long
(02010010)  Cursor is not in any window
(02010011)  Line too long - truncated
(02010012)  CC command requires position mark
(02010013)  Unable to create new process
(02010014)  Unable to create new pad
(02010015)  Input pads cannot be replicated
(02010016)  Bad font file
(02010017)  Font table full
(02010018)  Unknown function key name
(02010019)  Window too small for any text
(0201001A)  Display manager internal error #2
(0201001B)  Pad deleted by client process
(0201001C)  Pad still active
(0201001D)  Illegal grow coordinates
(0201001E)  Display manager pads cannot be named
(0201001F)  File is not an ascii file
(02010020)  Processes still active
(02010021)  Bad text range
(02010022)  Paste buffer empty
(02010023)  Invalid regular expression pattern
(02010024)  Pattern too long
(02010025)  Illegal substitution expression
(02010026)  No match
(02010027)  DM input window cannot be deleted
(02010028)  No room for more text at that position
(02010029)  Invalid hexadecimal digit
(0201002A)  Invalid tabstop value
(0201002B)  Edit pad already open on that file
(0201002C)  File already modified
(0201002D)  No window selected for grow or move
(0201002E)  Line contains non-editable controls
(0201002F)  Cannot delete .bak file
(02010030)  Heap file inconsistent during recovery
(02010031)  A process with that name already exists
(02010032)  Search aborted
(02010033)  Operation illegal during search or substitute
(02010034)  Argument value out of range
(02010035)  User logging out
(02010036)  Error processing user_data/key_defs
(02010037)  Previous fatal error prevents typing (try RW -R)
(02010038)  Nothing left to UNDO
(02010039)  Command illegal except during node startup
(0201003A)  Can not create paste buffer
(0201003B)  You cannot edit this pad
(0201003C)  Pathname has changed -- close window and reread
(0201003D)  Can not edit that object type
(0201003E)  Invalid paste buffer name
(0201003F)  Operation is illegal on an icon
(02010040)  Maximum file size has been exceeded
(02010041)  Echo mode is already on; ABRT will end echoing
(02010042)  Echo mode aborted
(02010043)  Name does not correspond to a window
(02010044)  Command aborted
(02010045)  Command is not allowed during login
(02010046)  Logout has been disabled
(02010047)  Insufficient memory for operation. Try closing pads
(02010048)  Paste error
(02010049)  Previous attempt to read file failed. Try reopening
(0201004A)  Cannot set privileged environment variable
(0201004B)  Variable not defined
(0201004C)  Command illegal after login
(0201004D)  No balancing character found
(0201004E)  Too many open characters
(0201004F)  Too many close characters
(02010050)  Current color map usage prevents turning MONO off
(02010051)  Mailbox data not available; pad request lost.
(02010052)  Commands cdm and mono are mutually exclusive
(02010053)  Window no longer exists
(02010054)  Command illegal when WMGR -OFF
(02010055)  Command illegal in foreign windows
(02010056)  WARNING: Paste buffer is too large for undo buffer
(02010057)  Unable to save file until no one else is reading it
(02010058)  Command valid by super user only
(02010059)  Command disabled while window is offscreen
(0201005A)  Command illegal in obscured window & DM is not window manager
(0201005B)  Can't logout from DM.  Use 'ex' to exit DM.
(0201005C)  Invalid display unit number
(0201005D)  -U option ignored when de-iconizing windows
(0201005E)  Loading user preferred key defs from ~/user_data/key_defs
(0201005F)  Insufficient rights for SHUT/EX
(02010060)  Command Illegal in Direct Window

            display manager / Heap manager:
(02020001)  heap table full
(02020002)  invalid length for heap get
(02020003)  invalid heap return
(02020004)  heap space already free on return

            display manager / Pad manager:
(02030001)  stream is not a pad
(02030002)  operation valid on input pads only
(02030003)  stream id out of range
(02030004)  operation attempted on unopened stream
(02030005)  operation valid on transcript pads only
(02030006)  pad not in raw mode
(02030007)  value out of range
(02030008)  too many fonts loaded in this pad
(02030009)  error loading font file
(0203000A)  unknown function key name
(0203000B)  only one input pad allowed per transcript
(0203000C)  illegal parameter combination
(0203000D)  existing pad must be an ascii file
(0203000E)  operation illegal with > 1 client process
(0203000F)  user aborted (WC -Q) edit operation
(02030010)  specified window number does not exist
(02030011)  window is no longer displayed
(02030012)  operation illegal on this type of pad
(02030013)  operation illegal when no display is attached
(02030014)  insufficient rights to perform DM command
(02030015)  invalid display unit number
(02030016)  pad not in frame mode

            display manager / Pbufs manager:
(02040001)  actual buffer type differs from specified type



            process manager / process manager:
(03010001)  invalid parameters to pm_$invoke
(03010002)  process had a fatal error
(03010003)  no space for Known Global Table
(03010004)  process already named
(03010005)  process has no name
(03010006)  error initializing global read/write storage
(03010007)  error allocating PFM error mask
(03010008)  too many libraries -- table space exceeded
(03010009)  mark/release list full
(0301000A)  process not found
(0301000B)  argument vector too large
(0301000C)  no static space available for process creation
(0301000D)  process name too long
(0301000E)  fork failed because more than one thread exists in the process
(0301000F)  fork failed because all the other threads are not suspended

            process manager / loader:
(03030001)  too many undefined globals
(03030002)  object module has too many sections
(03030003)  disk full or not enough address space to copy procedure text
(03030004)  file is incompatible with CPU type or OS revision, or isn't an executable
(03030005)  object module format is incompatible with this software release
(03030006)  not enough address space to map procedure
(03030007)  disk full or not enough address space for static storage
(03030008)  Known-Global-Table is full
(03030009)  reference to undefined global
(0303000A)  library contains unresolved global(s)
(0303000B)  peb required to execute this object module
(0303000C)  object module has unremovable breakpoints; rebind
(0303000D)  C library initialization required; no C library is installed
(0303000E)  DN160, DN460, or DN660 required to execute this object module
(0303000F)  FPU required to execute this object module
(03030010)  M020 series node required to execute this object module
(03030011)  Cross rev. incompatibility, sr9.5 code calling pre-sr9.5 code
(03030012)  load address already occupied
(03030013)  absolute load address already occupied
(03030014)  absolute object module requires relocation
(03030015)  conflicting loader options and requirements
(03030016)  unable to install a library required by object module
(03030017)  FPA board required to execute this object module
(03030018)  reached the end of the executable image list
(03030019)  invalid image handle
(0303001A)  invalid section number
(0303001B)  object module requires link step
(0303001C)  object module requires unsupported systype
(0303001D)  load in progress while table being examined
(0303001E)  compound executable contains no module for machine type
(0303001F)  object module systype sys3 obsolete; see sr10 release notes
(03030020)  load context requires position independent code
(03030021)  load context precludes unload
(03030022)  pre-sr10 obj files cannot be loaded at sr11
(03030023)  standards-compliance required by executable is unavailable

            process manager / process fault manager:
(0304FFFF)  warning - multiple debugger fault handlers are in use
(03040001)  cleanup handler released out of order
(03040002)  invalid cleanup record
(03040003)  cleanup handler established successfully
(03040004)  pfm_$cleanup_set was signalled
(03040005)  no rws space to create static cleanup handler
(03040006)  static cleanup handler not found
(03040007)  attempt to release non-existent fault handler
(03040008)  attempt to release fault handler at wrong level
(03040009)  unable to locate static fork handler
(0304000A)  stranded or corrupted cleanup handler record
(0304000B)  unable to unwind stack because of invalid stack frame
(0304000C)  ada exception detected
(0304000D)  pthread canceled asynchronously

            process manager / program manager:
(03050001)  argument does not exist
(03050002)  argument is too big for supplied buffer
(03050003)  stream vector is too large (>32)
(03050004)  not a program
(03050005)  process is vforked
(03050006)  incompatible invocation options
(03050007)  illegal option
(03050008)  option requires an argument
(03050009)  no entry point
(0305000A)  process is running on signal stack
(0305000B)  wrong object module format

            process manager / mapped segment manager:
(03060001)  unsupported access rights requested
(03060002)  attempt to release segment mapped by previous level
(03060003)  no object mapped at virtual address supplied
(03060004)  object already locked in a way that precludes your requested use
(03060005)  not enough address space available
(03060006)  bad length
(03060007)  object not found
(03060008)  no rights
(03060009)  insufficient rights
(0306000A)  operation illegal: objects are on different volumes
(0306000B)  operation illegal: object is not temporary
(0306000C)  operation illegal: object is not locked properly
(0306000D)  unable to map non-native object
(0306000E)  operation illegal: object is not a file

            process manager / r/w storage manager:
(03070001)  attempt to release non-heap entry using rws_$release_heap
(03070002)  attempt to release heap entry created at earlier program level
(03070003)  heap corruption detected; block header incorrect
(03070004)  heap corruption detected; level number in free block incorrect
(03070005)  attempt to release heap entry not allocated from this pool
(03070006)  requested rws_$pool_t out of range
(03070007)  unable to allocate because of lack of resources

            process manager / basic heap storage manager:
(03080001)  attempt to release already released heap storage
(03080002)  out of heap space
(03080003)  heap corruption detected; block header incorrect
(03080004)  requested too large an area from baf

            process manager / remote process manager:
(03090001)  unable to read naming and working directories
(03090002)  unable to resolve home text
(03090003)  unable to get SID
(03090004)  operation not supported by remote system
(03090005)  no more slots available to spawn remote process
(03090006)  unknown request
(03090007)  no more resources
(03090008)  mbx open failed on remote node
(03090009)  request timed out
(0309000A)  sid authentication check failed
(0309000B)  invalid to specify -me and -login
(0309000C)  local locksmiths only are allowed
(0309000D)  command line too long
(0309000E)  crp -me not allowed by remote system

            process manager / task manager:
(030A0001)  not enough virtual memory left to create task
(030A0002)  task does not exist
(030A0003)  task manager has not been initialized
(030A0004)  task exited
(030A0005)  invalid task handle
(030A0006)  internal error: bad status from ec2_$wait
(030A0007)  attempt to blast the distinguished task
(030A0008)  a task attempted to blast itself
(030A0009)  invalid task priority
(030A000A)  a foreground task attempted to create a background task
(030A000B)  internal error: ddslib initialization failed
(030A000C)  invalid task lifetime
(030A000D)  this process has the max # of tasks allowed - no more may be created
(030A000E)  task name is too long
(030A000F)  task does not have a completion EC
(030A0010)  task has not yet completed
(030A0011)  a task stack overflowed
(030A0012)  a task stack was corrupted

            process manager / secondary stack storage manager:
(030B0001)  attempt to release to null mark
(030B0002)  attempt to release to mark not contained in secondary stack
(030B0003)  attempt to release to invalid mark
(030B0004)  attempt to release to mark contained in unallocated storage
(030B0005)  unable to allocate secondary stack storage
(030B0006)  unable to deallocate secondary stack storage
(030B0007)  unable to unwind secondary stack frame

            process manager / CMA:
(030C0001)  Thread has been alerted - forced thread termination in progress
(030C0002)  Object referenced does not currently exist
(030C0003)  Object referenced is already in use
(030C0004)  Requested operation is improperly invoked
(030C0005)  Data or object could not be referenced by CMA operation
(030C0006)  Parameter to CMA operation is improper
(030C0007)  Operation failed due to insufficient quota
(030C0008)  Attempted stack overflow was detected
(030C0009)  Insufficient virtual memory for requested CMA operation
(030C000A)  Insufficent privilege for requested operation
(030C000B)  Internal error detected in CMA
(030C000C)  An assertion check has failed
(030C000D)  Current thread has been requested to exit
(030C000E)  No space is currently available to create a new stack
(030C000F)  No space is currently available to process an AST request
(030C0010)  Timed condition wait expired
(030C0011)  Normal successful completion
(030C0012)  Exception raised, address of exception object !XL
(030C0013)  Exception raised, VMS condition code follows
(030C0014)  Uninitialized exception raised
(030C0015)  Unimplemented CMA feature
(030C0016)  CMA initialization is already in progress
(030C0017)  Unhandled "illegal instruction" signal
(030C0018)  Unhandled "trace or breakpoint trap" signal
(030C0019)  Unhandled "IOT trap" signal
(030C001A)  Unhandled "EMT trap" signal
(030C001B)  Unhandled "floating point exception" signal
(030C001C)  Unhandled "bus error" signal
(030C001D)  Unhandled "segmentation violation" signal
(030C001E)  Unhandled "bad system call" signal
(030C001F)  Unhandled "broken pipe" signal
(030C0020)  Unhandled "CPU-time limit exceeded" signal
(030C0021)  Unhandled "file-size limit exceeded" signal
(030C0022)  The current stack was not allocated by CMA
(030C0023)  Unhandled "integer overflow trap" exception
(030C0024)  Unhandled "integer divide by zero trap" exception
(030C0025)  Unhandled "floating point overflow trap" exception
(030C0026)  Unhandled "floating point/decimal divide by zero trap" exception
(030C0027)  Unhandled "floating point underflow trap" exception
(030C0028)  Unhandled "decimal overflow trap" exception
(030C0029)  Unhandled "subscript out of range trap" exception
(030C002A)  Unhandled "floating point overflow fault" exception
(030C002B)  Unhandled "floating point divide by zero fault" exception
(030C002C)  Unhandled "floating point underflow fault" exception
(030C002D)  Unhandled "reserved addressing fault" exception
(030C002E)  Unhandled "privileged instruction fault" exception
(030C002F)  Unhandled "reserved operand fault" exception



            US / file utility:
(04010001)  object must be a leaf
(04010002)  unrecognized sys_type returned from file_$attributes
(04010003)  unrecognized entry type returned from naming server
(04010004)  unable to replace or delete a system directory
(04010005)  compare failed
(04010006)  destination directory is contained within source directory
(04010007)  can't copy a file or tree to itself
(04010008)  source and destination are on different disk volumes
(04010009)  source directory is contained within destination directory
(0401000A)  pathname truncated
(0401000B)  leaf truncated

            US / print utility:
(0402FFFB)  Printer fault
(0402FFFC)  Printer is out of paper
(0402FFFD)  job queued, but print server suspended
(0402FFFE)  job queued, but print server not running
(0402FFFF)  Printer is offline
(04020001)  ./sys/print directory not found
(04020002)  print queue directory specified by link was not found
(04020003)  file to be printed is not an ascii text file
(04020004)  file to be printed is corrupted
(04020005)  prflib option is unknown
(04020006)  prflib option value is incorrect
(04020007)  more than 1 file found with prflib search option
(04020008)  file type can not be printed
(04020009)  problem with PostScript interpreter
(0402000A)  file can not be printed on this printer
(0402000B)  printer extension value incorrect
(0402000C)  printer extension value > 9
(0402000D)  target invalid
(0402000E)  specified printer does not exist
(0402000F)  no jobs queued for specified printer
(04020010)  operation illegal : queue is not empty
(04020011)  max number of jobs queued
(04020012)  print job is active
(04020013)  print server already registered with specified ext value
(04020014)  illegal print server signal type
(04020015)  communications failure. Try again.
(04020016)  no entry in database for specifed key
(04020017)  wrong type specified for key
(04020018)  read error in print server driver
(04020019)  write error in print server driver
(0402001A)  error creating I/O connection
(0402001B)  data in print server database corrupted
(0402001C)  error closing I/O connection
(0402001D)  internal error in print server driver
(0402001E)  read error in print server filter
(0402001F)  write error in print server filter
(04020020)  open error in print server filter
(04020021)  format error in print server filter
(04020022)  input object type incorrect for this filter
(04020023)  unable to allocate memory
(04020024)  printer with this name already exists
(04020025)  user terminated print job
(04020026)  user suspended print job
(04020027)  print job duplicate from pre10q daemon
(04020028)  can not find specified print manager
(04020029)  no printers registered to print manager

            US / DB:
(04030001)  normal exit from debugger

            US / object module IO:
(04040001)  too many IO channels in use
(04040002)  channel is not open
(04040003)  get or put outside file
(04040004)  ran out of free read/write storage
(04040005)  cannot open another temporary file; one is already opened
(04040006)  requested object file name exists and is not an object

            US / TU58 tape:
(04050001)  bad block number
(04050002)  invalid op code
(04050003)  motor stopped
(04050004)  seek error
(04050005)  data check
(04050006)  write protected
(04050007)  no cartridge
(04050008)  bad unit number
(04050009)  end of tape
(0405000A)  failed self-test

            US / sio:
(04060001)  object on this stream is not sio line
(04060002)  bad option parameter
(04060003)  illegal stream id
(04060004)  stream not open
(04060005)  speed incompatible with partner SIO line

            US / pattern matcher:
(04070001)  too many tag specifiers ("{ }")
(04070002)  too many end-tag characters ("}")
(04070003)  missing end-class character ("]")
(04070004)  invalid use of closure ("*")
(04070005)  missing end-tag character ("}")
(04070006)  pattern too big to fit in supplied buffer
(04070007)  invalid escape sequence
(04070008)  bad pattern
(04070009)  given string and pattern do not match
(0407000A)  output string too small

            US / wildcard processor:
(04080001)  can't get free space for pathname
(04080002)  invalid wildcard length
(04080003)  invalid wildcard name
(04080004)  invalid use of directory closure ("*" or "+")
(04080005)  too many components
(04080006)  internal error #1
(04080007)  circular link detected
(04080008)  first name found
(04080009)  excess end tags ("}") in wildcard
(0408000A)  missing end tags ("}") in wildcard

            US / font manager:
(04090001)  font table is full
(04090002)  bad font file
(04090003)  unrecognized font version #
(04090004)  bad font id argument
(04090005)  bad value id
(04090006)  character is not in font
(04090007)  free storage space full
(04090008)  character is too large
(04090009)  descriptor or header value is out of range
(0409000A)  invalid character code
(0409000B)  no character image
(0409000C)  font is read-only
(0409000D)  one or more images are required
(0409000E)  font table is full

            US / shell:
(040A0001)  shell lexer has failed - unable to recognize input
(040A0002)  parse tree has been corrupted - unable to recover
(040A0003)  unable to allocate space for parse tree
(040A0004)  wrong file type - can only execute object and text files
(040A0005)  program not found
(040A0006)  inlib command obsolete; relink program with inlib option
(040A0007)  insufficient rights

            US / aclm:
(040B0001)  no right to perform operation
(040B0002)  insufficient rights to perform operation
(040B0003)  exit_super called more often than enter_super
(040B0004)  wrong type - operation illegal on system objects
(040B0005)  entry already exists
(040B0006)  ACL is remote
(040B0007)  ACL is on different volume than object
(040B0008)  ACL protects wrong type of object
(040B0009)  insufficient address space to open ACL
(040B000A)  required entry may not be deleted
(040B000B)  no entry - entry number too large
(040B000C)  image buffer too small or incorrect size
(040B000D)  ACL object not found
(040B000E)  ACL would be unchangeable
(040B000F)  object may not be readable by backup procedure
(040B0010)  no right to set subsystem data or subsystem manager
(040B0011)  project list is full - no more entries may be added
(040B0012)  project list is too big - it cannot be added to object
(040B0013)  ACL is full - no more entries may be added
(040B0014)  invalid right name
(040B0015)  invalid person identifier
(040B0016)  invalid project identifier
(040B0017)  invalid organization ID
(040B0018)  invalid node ID
(040B0019)  non-existent SID
(040B001A)  subsystem name not found
(040B001B)  required entry missing from ACL
(040B001C)  attempt to issue unimplemented ACL call
(040B001D)  invalid selection for required entry
(040B001E)  invalid required entry
(040B001F)  may only setid to required entry
(040B0020)  may not use setid in a default acl
(040B0021)  invalid right supplied

            US / uvtoc:
(040C0001)  object is not a local entry directory
(040C0002)  no available address space
(040C0003)  end of vtoc

            US / cl:
(040D0001)  Argument too long
(040D0002)  Too many arguments follow keyword
(040D0003)  Not enough arguments follow keyword
(040D0004)  Invalid decimal number
(040D0005)  No match for wildcard
(040D0006)  Missing required derived name
(040D0007)  Unrecognized or redundant keyword
(040D0008)  Duplicate set element
(040D0009)  Invalid set element

            US / bin_tree:
(040E0001)  unable to allocate rws space
(040E0002)  end of list
(040E0003)  not found



            library / open:
(05010001)  do not provide name for SCRATCH file
(05010002)  need name of file to open
(05010003)  invalid STATUS= option
(05010004)  direct access not allowed with variable length records
(05010005)  given record length is not compatible with this file
(05010006)  need record length > zero
(05010007)  invalid ACCESS= option
(05010008)  invalid FORM= option
(05010009)  invalid UNIT= specifier
(0501000A)  no space to create requested IO unit
(0501000B)  FORM= option value not compatible with this file
(0501000C)  BLANK= option not allowed for unformatted file
(0501000D)  invalid BLANK= option
(0501000E)  unrecognized special name beginning with "-"
(0501000F)  command line arguments are named ^1 thru ^9
(05010010)  file not found

            library / close:
(05020001)  KEEP status not allowed for SCRATCH file
(05020002)  invalid STATUS= option
(05020003)  can't delete file

            library / mark/release:
(05030001)  cannot find old Fortran IO state record

            library / IO:
(05040001)  no space to create IO unit
(05040002)  unit is not connected
(05040003)  recursive use of FORTRAN IO
(05040004)  direct access not allowed to sequential file
(05040005)  need record number for direct access
(05040006)  invalid option(s) used to reference internal file
(05040007)  feature not implemented yet
(05040008)  end of file
(05040009)  unformatted operation not allowed on file opened for formatted IO
(0504000A)  formatted operation not allowed on file opened for unformatted IO
(0504000B)  not enough virtual address space left to perform requested operation

            library / IO transfer:
(05050001)  Internal format error
(05050002)  No edit specifier in format
(05050003)  Improper character in input data
(05050004)  Real exponent too large
(05050005)  Improper format descriptor for variable type
(05050006)  Data overflows buffer size
(05050007)  Not enough data in input record

            library / read:
(05060001)  end of file
(05060002)  record is larger than available buffer
(05060003)  = expected
(05060004)  name not found in namelist
(05060005)  ) expected
(05060006)  integer expected as an array subscript
(05060007)  ( expected
(05060008)  number expected
(05060009)  , expected
(0506000A)  array variable expected
(0506000B)  subscript out of bounds
(0506000C)  unknown high dimension on array variable

            library / write:
(05070001)  nyi

            library / position:
(05080001)  no space to create unit
(05080002)  unit is not connected
(05080003)  recursive IO

            library / floating point:
(05090001)  overflow in add/sub
(05090002)  underflow in add/sub
(05090003)  loss of significance in add/sub
(05090004)  overflow in multiply
(05090005)  underflow in multiply
(05090006)  overflow in divide
(05090007)  underflow in divide
(05090008)  division by zero
(05090009)  overflow in convert to word integer
(0509000A)  overflow in convert to long integer
(0509000B)  overflow in dp add/sub
(0509000C)  underflow in dp add/sub
(0509000D)  loss of significance in dp add/sub
(0509000E)  overflow in dp multiply
(0509000F)  underflow in dp multiply
(05090010)  overflow in dp divide
(05090011)  underflow in dp divide
(05090012)  dp division by zero
(05090013)  overflow in convert double to single
(05090014)  underflow in convert double to single
(05090015)  square root of a negative number
(05090016)  overflow in exp function
(05090017)  overflow in dp exp function
(05090018)  arg of log function less than or equal to zero
(05090019)  dp arg of log function less than or equal to zero
(0509001A)  underflow in exp function
(0509001B)  underflow in dp exp function
(0509001C)  attempt to raise sp zero to a power <= zero
(0509001D)  attempt to raise sp negative number to a real power
(0509001E)  attempt to raise dp zero to a power <= zero
(0509001F)  attempt to raise dp negative number to a real power
(05090020)  both arguments zero in sp atan2
(05090021)  both arguments zero in dp atan2
(05090022)  overflow in sp x**y
(05090023)  overflow in dp x**y
(05090024)  underflow in sp x**y
(05090025)  underflow in dp x**y
(05090026)  loss of significance in sp tan - argument too large
(05090027)  loss of significance in dp tan - argument too large
(05090028)  loss of significance in sp sin - argument too large
(05090029)  loss of significance in dp sin - argument too large
(0509002A)  loss of significance in sp cos - argument too large
(0509002B)  loss of significance in dp cos - argument too large
(0509002C)  argument out of range
(0509002D)  invalid op code
(0509002E)  unsupported function for this hardware configuration

            library / inquire:
(050A0001)  cmd line args are named ^1 thru ^9
(050A0002)  recursive io
(050A0003)  target string too small

            library / format:
(050B0001)  left parenthesis expected
(050B0002)  right parenthesis expected
(050B0003)  period expected
(050B0004)  comma, colon, slash, or right parenthesis expected
(050B0005)  unsigned integer constant expected
(050B0006)  p format not followed by f, e, d, or g
(050B0007)  bad hollerith or character constant
(050B0008)  unrecognized format specifier

            library / tfp:
(050CFFFF)  computed block count doesn't match that in EOF label
(050C0001)  volume not found
(050C0002)  volume not open
(050C0003)  volume already open
(050C0004)  file not open
(050C0005)  file already open
(050C0006)  file not found
(050C0007)  tape i/o error
(050C0008)  end of volume encountered
(050C0009)  invalid file section value
(050C000A)  invalid file sequence value
(050C000B)  invalid generation number value
(050C000C)  invalid generation version number value
(050C000D)  invalid block count value
(050C000E)  invalid block length value
(050C000F)  invalid record length value
(050C0010)  invalid buffer offset value
(050C0011)  no tcb is available (internal table full)
(050C0012)  invalid unit number
(050C0013)  first label on volume is not VOL1 label
(050C0014)  label version number in VOL1 label is not "3"
(050C0015)  tape drive is already in use by this process
(050C0016)  end of file
(050C0017)  tape limit: eot/bot marker encountered
(050C0018)  label size is in error; not 80 characters
(050C0019)  block size is too large
(050C001A)  invalid record format specifier
(050C001B)  unlabeled operation attempted on a labeled volume
(050C001C)  labeled operation attempted on an unlabeled volume
(050C001D)  invalid volume id
(050C001E)  conflicting blocking information
(050C001F)  file does not exist on this volume
(050C0020)  internal or exception procedure returned bad new-volume info
(050C0021)  a HDR1 label is missing where one is required
(050C0022)  an EOF1 (or EOV1) label is missing where one is required
(050C0023)  a double filemark was encountered unexpectedly
(050C0024)  inconsistent file sequence numbers
(050C0025)  file sequence number tracking error
(050C0026)  read attempted on file open for writing
(050C0027)  write attempted on file open for reading
(050C0028)  block list size is invalid
(050C0029)  an EOV1 (or EOF1) label is missing where one is required
(050C002A)  wrong volume, file header is inconsistent with previous trailer
(050C002B)  operation not started due to error in previous block list
(050C002C)  record i/o attempted on volume open for block i/o only
(050C002D)  variable record with invalid record control word encountered
(050C002E)  spanned record with invalid segment control word encountered
(050C002F)  erroneous spanning indicator or segment out of sequence encountered
(050C0030)  invalid mode set passed to tfp_$set_mode
(050C0031)  cannot read mt status - wait is required
(050C0032)  more info returned from mt_$wait that expected
(050C0033)  attempt to enqueue too many operations
(050C0034)  magtape is offline or floppy is not ready
(050C0035)  wait not performed before go
(050C0036)  go called with no work to do
(050C0037)  invalid operation code
(050C0038)  OS magtape manager out of pb's
(050C0039)  wait called when not required
(050C003A)  OS magtape manager didn't purge ops on error
(050C003B)  # ops executed does not match # ops completed
(050C003C)  i/o error recovery failed
(050C003D)  invalid recovery value returned by execption handler
(050C003E)  zero length block list unexpected
(050C003F)  tape rewind error
(050C0040)  tape space-record error
(050C0041)  tape space-filemark error
(050C0042)  tape write-filemark error
(050C0043)  tape or floppy is write-protected
(050C0044)  redundant call to wire i/o buffers
(050C0045)  attempt to already-unwired i/o buffers
(050C0046)  unable to re-open volume; current position is unknown
(050C0047)  unable to re-open volume; info file is bad
(050C0048)  tape read-foreign error
(050C0049)  cannot write at this tape position
(050C004A)  unexpected sysboot error
(050C004B)  unknown rmt error
(050C004C)  rmt tape blank or offline
(050C004D)  rmt tape is blank
(050C004E)  rmt tape is write protected or is offline
(050C004F)  rmt tape is offline
(050C0050)  rmt tape is write protected or at end-of-tape
(050C0051)  rmt tape is at end-of-tape
(050C0052)  rmt open failed
(050C0053)  rmt prevailing write error
(050C0054)  rmt unsupported operation

            library / Pascal:
(050D0001)  too many open files
(050D0002)  use of unopened file
(050D0003)  REWRITE required before writing to file
(050D0004)  RESET required before reading from file
(050D0005)  read past end of file
(050D0006)  real exponent too large
(050D0007)  invalid operation on file
(050D0008)  invalid OPEN parameter
(050D0009)  inconsistent file usage
(050D000A)  invalid read data
(050D000B)  internal error; invalid I/O key type
(050D000C)  attempt to DISPOSE a NIL pointer
(050D000D)  attempt to DISPOSE block of memory of zero or negative size
(050D000E)  attempt to DISPOSE pointer to memory that was previously DISPOSEd
(050D000F)  index outside of string bounds
(050D0010)  overflow beyond maximum size of string
(050D0011)  invalid write data
(050D0012)  unable to DISPOSE pointer; pointer may be previously DISPOSEd or not allocated

            library / MBX manager:
(050E0001)  size parameter too large
(050E0002)  size parameter too small
(050E0003)  too many channels
(050E0004)  illegal mbx handle
(050E0005)  file already in use
(050E0006)  no room in channel
(050E0007)  msg too big for channel
(050E0008)  no active servers
(050E0009)  open rejected
(050E000A)  end of file
(050E000B)  no available channels
(050E000C)  channel not open
(050E000D)  unexpected control message received
(050E000E)  remote transmit failed
(050E000F)  remote reply wait timed out
(050E0010)  unused
(050E0011)  invalid mbx handle
(050E0012)  wrong mbx version number
(050E0013)  unknown remote request
(050E0014)  remote service denied
(050E0015)  channel empty
(050E0016)  supplied buffer too small
(050E0017)  unused
(050E0018)  no more resources available
(050E0019)  bad key
(050E001A)  returned data does not complete a record
(050E001B)  unused
(050E001C)  interrupt data received
(050E001D)  another interrupt is already pending on this channel
(050E001E)  client and server cannot be same process
(050E001F)  client timed out while waiting for open to complete
(050E0020)  error occurred during network sequenced send
(050E0021)  server node mbx_helper has no rights to server mbx
(050E0022)  client has no rights to local mbx_helper sysmbx
(050E0023)  server record header conflicts with buffer length
(050E0024)  local mbx_helper not running and couldn't be started
(050E0025)  no remote mbx_helper running
(050E0026)  client has no rights to server mailbox

            library / ptx plot package:
(050F0001)  image too small in the x-dimension
(050F0002)  image too small in the y-dimension
(050F0003)  invalid value for horizontal start

            library / floppy seq i/o manager:
(0510FFFE)  warning: record truncated
(0510FFFF)  warning: disk almost full
(05100001)  invalid floppy unit #
(05100002)  floppy is full
(05100003)  control block is too large
(05100004)  end of file
(05100005)  end of tape
(05100006)  unit is already open
(05100007)  unit is not open
(05100008)  attempted write on read-only floppy
(05100009)  invalid marker specification
(0510000A)  data error: filler expected where none was found
(0510000B)  data error: filler found where not expected
(0510000C)  data error: invalid control code
(0510000D)  data error: record trailer missing
(0510000E)  data error: record trailer doesn't match header
(0510000F)  beginning of tape
(05100010)  data error: beginning of tape found where unexpected
(05100011)  floppy is physically write-protected
(05100012)  floppy is not ready
(05100013)  invalid label record -- probably not written with WBAK

            library / Ethernet driver:
(05110001)  controller does not exist
(05110002)  invalid ethernet controller number
(05110003)  controller not online
(05110004)  invalid buffer size parameter
(05110005)  invalid statistics type
(05110006)  invalid mode parameter
(05110007)  invalid options parameter
(05110008)  illegal number of addresses
(05110009)  address is not a valid group address
(0511000A)  no receive available
(0511000B)  quit while waiting
(0511000C)  receive packet truncated
(0511000D)  too many collisions
(0511000E)  device timed out
(0511000F)  operation failed
(05110010)  internal frame header invalid
(05110011)  internal dma length error
(05110012)  unexpected status from device
(05110013)  diagnostic ram test failed
(05110014)  diagnostic dma test failed
(05110015)  diagnostic transmitter test failed
(05110016)  diagnostic receiver test failed
(05110017)  diagnostic loopback test failed
(05110018)  DDF version is obsolete
(05110019)  DMA/PIO did not complete
(0511001A)  service is not implemented in this driver
(0511001B)  adaptor reported no resources available
(0511001C)  adaptor self-test failed
(0511001D)  No packet type set for this process
(0511001E)  Packet types are already set for this process
(0511001F)  Ethernet unit is shared with other processes
(05110020)  Ethernet driver master lock timeout
(05110021)  Packet type already in use by another process
(05110022)  Internal error -- unable to allocate control block
(05110023)  Internal error -- unable to open socket
(05110024)  Unable to allocate receive buffers
(05110025)  Bad argument to ethernet routine
(05110026)  Ethernet device lock timeout

            library / ikon driver:
(05120001)  invalid action code
(05120002)  invalid buffer size
(05120003)  no PBU or Ikon controller is installed
(05120004)  device is offline
(05120005)  device is out of paper
(05120006)  device fault
(05120007)  device is busy

            library / pipe manager:
(05130001)  supplied buffer too large
(05130002)  pipe is empty
(05130003)  pipe is full
(05130004)  illegal pipe operation
(05130005)  pipe has no readers
(05130006)  pipe has no writers
(05130007)  pipe could not be locked

            library / amlc manager:
(05140001)  controller does not exist
(05140002)  bad unit number

            library / streams-magtape manager:
(05150001)  object is not a magtape file descriptor
(05150002)  magtape file descriptor contains invalid data
(05150003)  invalid attribute specifier
(05150004)  invalid creation/expiration date
(05150005)  invalid record format
(05150006)  descriptor file is read-only
(05150007)  invalid unit number
(05150008)  invalid file sequence number
(05150009)  invalid file section number
(0515000A)  invalid block length
(0515000B)  invalid record length
(0515000C)  invalid generation number
(0515000D)  invalid generation version number
(0515000E)  invalid buffer offset
(0515000F)  magtape volume is in use
(05150010)  attempt to label unlabeled volume

            library / streams-directory manager:
(05160001)  unrecognized mode
(05160002)  size parameter too small
(05160003)  too many channels

            library / ipc socket manager:
(05170001)  range error
(05170002)  too deep
(05170003)  socket error
(05170004)  no more sockets
(05170005)  not owner
(05170006)  too much data
(05170007)  socket empty
(05170008)  not ipc object
(05170009)  socket not open
(0517000A)  socket already open
(0517000B)  time out

            library / traceback utilities:
(0518FFFF)  warning: guessed return address
(05180001)  pc not in known code
(05180002)  invalid object module version
(05180003)  no debug table entry for routine
(05180004)  no debug info available for routine
(05180005)  frame type illegal for operation
(05180006)  routine has no arguments
(05180007)  specified argument does not exist
(05180008)  no stack frame exists for routine

            library / spe driver:
(05190001)  SPE controller or SW not installed
(05190002)  controller not initialized
(05190003)  device is busy
(05190004)  device is offline
(05190005)  device is out of paper
(05190006)  device fault
(05190007)  invalid sio line
(05190008)  controller already initialized
(05190009)  error in interrupt handler

            library / analog/digital driver:
(051A0001)  Buffer length limited to 1024 bytes
(051A0002)  Attempt to allocate or declare too many buffers
(051A0003)  System cannot create the new buffer
(051A0004)  Attempt to use a buffer that is not declared
(051A0005)  Attempt to link a buffer already on xfer list
(051A0006)  Declared buffers must not cross 1024-byte bndry
(051A0007)  Declared buffer address must be word-aligned
(051A0008)  Converter clock set too fast or too slow
(051A0009)  A/D channel list limited to 16 entries
(051A000A)  Valid A/D channel numbers are 0 through 15
(051A000B)  Buffer was not ready in time for DMA transfer
(051A000C)  Clocks or triggers too fast
(051A000D)  Operation took longer than the time out interval
(051A000E)  Waiting for buffer already released
(051A000F)  Waiting for buffer not in transfer
(051A0010)  Converter hardware not present
(051A0011)  Unable to convert value given

            library / compound executables manager:
(051B0001)  bad compound executable format
(051B0002)  specified module not found in compound executable



            graphics / primitives:
(06010001)  Primitives not initialized
(06010002)  Primitives already initialized
(06010003)  Wrong display hardware
(06010004)  Operation illegal for DM frame
(06010005)  Must borrow display for this operation
(06010006)  No attributes defined for bitmap
(06010007)  No more bitmap space available
(06010008)  Dimension too big
(06010009)  Dimension too small
(0601000A)  Bad bitmap descriptor
(0601000B)  Bad attribute block descriptor
(0601000C)  Window origin out of bitmap bounds
(0601000D)  Source window origin out of bitmap bounds
(0601000E)  Destination window origin out of bitmap bounds
(0601000F)  Invalid plane number
(06010010)  Cannot deallocate this bitmap
(06010011)  Coordinate value out of bounds
(06010012)  Invalid color map
(06010013)  Invalid raster operation value
(06010014)  Bitmap is read-only
(06010015)  Internal error
(06010016)  Font table is full
(06010017)  Bad font file
(06010018)  Invalid font id
(06010019)  Window is obscured
(0601001A)  Display is not in direct mode
(0601001B)  No polygon is being defined
(0601001C)  Keyboard has not been acquired
(0601001D)  Display has not been acquired
(0601001E)  Illegal pixel value range
(0601001F)  Operation illegal when in imaging format
(06010020)  Bad value for imaging format
(06010021)  Must release display for this operation
(06010022)  Different screen modes for input cannot be mixed
(06010023)  No input events are enabled
(06010024)  Duplicate points are illegal
(06010025)  Array must be in ascending order
(06010026)  character is not in font
(06010027)  Illegal bitmap for a fill pattern
(06010028)  fill pattern scale must be one
(06010029)  Incorrect alignment
(0601002A)  Illegal text path
(0601002B)  Unable to rotate this font
(0601002C)  Font is read only
(0601002D)  Illegal length for styled line pattern
(0601002E)  Illegal for pixel bitmap
(0601002F)  Input enabled in too many windows
(06010030)  Illegal software version number in pad
(06010031)  Bitmap descriptor is not for a bitmap file
(06010032)  No color map has been defined for this file
(06010033)  Illegal call for current decomp technique
(06010034)  Cannot change decomp technique while in polygon
(06010035)  Specific winding number must be nonzero
(06010036)  Arc path coordinates have overflowed 16bits
(06010037)  Invalid virtural device id
(06010038)  Decomp technique not valid
(06010039)  Rop mode set is null, set via raster_op_prim_set
(0601003A)  Multiple rop modes in set, and rops not equal
(0601003B)  Input events not available in gpr_$no_display mode
(0601003C)  Style call is not active
(0601003D)  No more fast buffers for double buffering
(0601003E)  Input buffer overflowed
(0601003F)  Conflicting input event types
(06010040)  Invalid input event type
(06010041)  Specified option is not valid
(06010042)  Unimplemented GPR traitop
(06010043)  Color map ID is not valid
(06010044)  Resources required for this operation are unavailable
(06010045)  Operation not supported in FRAME mode
(06010046)  Requested resource type was not valid
(06010047)  Source and target of BLT must be on same device

            graphics / DM support:
(06020001)  Invalid bitmap address
(06020002)  Invalid bitmap length

            graphics / core graphics:
(06030001)  3D inquiry function needed
(06030002)  Count parameter or array size is less than 1
(06030003)  Array size is less than 3
(06030004)  There is no selected view surface
(06030005)  Inconsistant viewing specification
(06030006)  A segment is currently open
(06030007)  There is no open segment
(06030008)  Color attribute not supported by view surface
(06030009)  Intensity attribute not supported by view surface
(0603000A)  Requested linestyle attribute not supported
(0603000B)  Requested linewidth attribute not supported
(0603000C)  Requested pen attribute not supported
(0603000D)  Requested font not supported
(0603000E)  String contains undefined characters
(0603000F)  Charplane and charup vectors are parallel
(06030010)  Requested marker symbol not supported
(06030011)  There already is an open segment
(06030012)  The requested retained segment name already exists
(06030013)  Current image transformation is of wrong type
(06030014)  There is no open retained segment
(06030015)  There is no retained segment matching given name
(06030016)  There already exists a segment with given name
(06030017)  There is no open temporary segment
(06030018)  One or more of the attribute values is invalid
(06030019)  All charplane normal components are zero
(0603001A)  All charup components are zero
(0603001B)  Image transformation type is invalid
(0603001C)  Image transformation higher type than requested
(0603001D)  Segment image xform type not compatible with inq
(0603001E)  Segment image xform type higher than inquiry
(0603001F)  Maximum less than minimun value (2D)
(06030020)  View up vector components both equal zero
(06030021)  Program has already set NDC space
(06030022)  NDC default space has already been established
(06030023)  A parameter is not in NDC system : 0->1
(06030024)  Neither width nor height is equal to 1
(06030025)  Width or height is equal to zero
(06030026)  Viewport corner outside of NDC space
(06030027)  A 3D viewing function was needed, not 2D
(06030028)  Specified NDC position is outside viewport
(06030029)  The world coordinate xform is not invertible
(0603002A)  World coordinate position outside clipping window
(0603002B)  All 3 components of view plane normal are zero
(0603002C)  Front distance is greater than back distance
(0603002D)  Parallel projection and direction components = 0
(0603002E)  Window maximum less than window minimum
(0603002F)  All 3 viewup normal vector components are = 0
(06030030)  Maximum less than minimun value (3D)
(06030031)  Projection of world coord. position outside window
(06030032)  World coordinate position in front of clip plane
(06030033)  World coordinate position in back of clip plane
(06030034)  World coord. position behind center of projection
(06030035)  Coordinate system type has already been set
(06030036)  Too late - viewing established or segment exists
(06030037)  View plane normal and viewup vector parallel
(06030038)  Front plane not between cop and back plane
(06030039)  Direction of projection aparallel to view plane
(0603003A)  Center of projection on or behind view plane
(0603003B)  Front and back clipping planes coincident
(0603003C)  Device already initialized
(0603003D)  Device class or device number is invalid
(0603003E)  Device class is invalid
(0603003F)  Array contains invalid device number
(06030040)  Device is not initialized
(06030041)  Device is already enabled
(06030042)  Member of group not initialized
(06030043)  Device is not enabled
(06030044)  Locator device not enabled
(06030045)  Valuator device not enabled
(06030046)  Time parameter is less than zero
(06030047)  Event device not initialized
(06030048)  Invalid event device class
(06030049)  Association already exists
(0603004A)  Event class is invalid
(0603004B)  One or both devices not initialized
(0603004C)  Association does not exist
(0603004D)  Event report not from pick device
(0603004E)  Event report not from keyboard device
(0603004F)  Event report not from stroke device
(06030050)  Needed 3D input function
(06030051)  Locator not enabled or associated
(06030052)  Valuator not enabled or associated
(06030053)  No button devices are initialized
(06030054)  Specified pick device not initialized
(06030055)  Specified keyboard device not initialized
(06030056)  Specified stroke device not initialized
(06030057)  Specified locator device not initialized
(06030058)  Specified valuator device not initialized
(06030059)  Echo type is invalid for specified class
(0603005A)  Specified device does not accept echo segment
(0603005B)  Image xform of segment incompatible with echo type
(0603005C)  Echo position outside of NDC space
(0603005D)  Pick aperature is less than or equal to zero
(0603005E)  Buffer size out of bounds
(0603005F)  Cursor start position out of bounds
(06030060)  Initial string contains undefined characters
(06030061)  Specified button device is not initialized
(06030062)  Distance or time less than or equal to zero
(06030063)  Specified locator position outside of NDC space
(06030064)  Maximum less than minimun (3D)
(06030065)  Locport corner outside of NDC space
(06030066)  Low value is greater than high value
(06030067)  Initial value not within defined range
(06030068)  Associated size less than or equal to zero
(06030069)  Duplication size less than or equal to zero
(0603006A)  Core has already been initialized
(0603006B)  Specified output level cannot be supported
(0603006C)  Specified input level cannot be supported
(0603006D)  Specified dimension cannot be supported
(0603006E)  View surface is already initialized
(0603006F)  No output device associated with view surface
(06030070)  No other view surface can be initialized
(06030071)  View surface is not initialized
(06030072)  View surface is already selected
(06030073)  View surface cannot be selected
(06030074)  View surface has not been selected
(06030075)  Immediate visibility state is invalid
(06030076)  Currently in batch of updates
(06030077)  Not in batch of updates
(06030078)  Element of segment array does not exist
(06030079)  Invalid visibility array element
(0603007A)  Core has not been initialized
(0603007B)  Function at a higher level than current suppory
(0603007C)  Invalid error log invocation
(0603007D)  Function is not supported
(0603007E)  Parameter count is incorrect
(0603007F)  One or more parameters invalid
(06030080)  Vertex array is too small
(06030081)  Intensity value is invalid
(06030082)  Color value is invalid
(06030083)  Specified table range is invalid
(06030084)  Low or high table index is invalid
(06030085)  Low table index is greater than high
(06030086)  Too few values to fill specified range
(06030087)  Invalid intensity array element
(06030088)  Invalid color array element
(06030089)  Origin outside NDC space
(0603008A)  Array size invalid
(0603008B)  Array row invalid
(0603008C)  Array column invalid
(0603008D)  Invalid parameter value
(0603008E)  View surface is initialized to intensity
(0603008F)  Invalid index value
(06030090)  Shading vertex mismatch
(06030091)  Vertices not coplanar
(06030092)  Less than three vertices received
(06030093)  Index range is too large
(06030094)  Table is too small
(06030095)  View surface is of type color
(06030096)  View surface is of type intensity
(06030097)  There is no hidden surface support
(06030098)  The specified mode is invalid
(06030099)  View surface is initialized
(0603009A)  Invalid view surface type parameter
(0603009B)  Input currently not supported in frame mode
(0603009C)  There is no room to add to the display list
(0603009D)  There is no room for new segments
(0603009E)  Polygon was too complex to decompose
(0603009F)  Time out in input routine

            graphics / map file manager:
(06040001)  Bits/inch parameter is negative
(06040002)  X dimension is not positive
(06040003)  Y dimension is not positive
(06040004)  Words/line parameter is too small
(06040005)  Position parameter is illegal

            graphics / 2D metafile manager:
(06050001)  Not initialized
(06050002)  Already initialized
(06050003)  Data coerce needed
(06050004)  No current file
(06050005)  Too many files
(06050006)  File name not found
(06050007)  File id invalid
(06050008)  No current segment
(06050009)  Another segment is open
(0605000A)  Segment name already used
(0605000B)  Too many segments
(0605000C)  Segment name not found
(0605000D)  Segment id invalid
(0605000E)  Cant delete instanced segment
(0605000F)  Segment locked by pick
(06050010)  Invalid polyline options
(06050011)  Negative circle radius
(06050012)  Circle cant be filled
(06050013)  Illegal self instance
(06050014)  Aclass id invalid
(06050015)  Ablock id invalid
(06050016)  Too many ablocks
(06050017)  Ablock not created
(06050018)  Attribute value invalid
(06050019)  No font family included
(0605001A)  Too many font families
(0605001B)  Font family name not found
(0605001C)  Font family id invalid
(0605001D)  Cant delete font family in use
(0605001E)  No gm bitmap exists
(0605001F)  Viewport id invalid
(06050020)  Viewport bounds invalid
(06050021)  Viewport doesnt exist
(06050022)  No current viewport
(06050023)  Too many viewports
(06050024)  Nothing displayed in viewport
(06050025)  Coordinate conversion overflow
(06050026)  Command type doesnt match
(06050027)  No current command
(06050028)  No pick matches found
(06050029)  Pick list not initialized
(0605002A)  Pick list empty
(0605002B)  Pick list too long
(0605002C)  Input event type invalid
(0605002D)  Wrong display mode
(0605002E)  Illegal value
(0605002F)  Bounds invalid
(06050030)  Name length invalid
(06050031)  Font family name already used
(06050032)  Obsolete procedure
(06050033)  Command type invalid
(06050034)  Concurrency mode invalid
(06050035)  Access mode invalid
(06050036)  Edit option invalid
(06050037)  Index value invalid
(06050038)  Font type invalid
(06050039)  Too many environment file definitions
(0605003A)  Negative arc radius
(0605003B)  Flat arc

            graphics / GSR:
(06060001)  Operation invalid
(06060002)  Zero vector invalid
(06060003)  Vectors are dependent
(06060004)  Invalid hither distance
(06060005)  Invalid clip planes
(06060006)  Invalid window
(06060007)  Matrix is singular
(06060008)  Ran out of space
(06060009)  Invalid file id
(0606000A)  Too many files
(0606000B)  Viewport outside ldc range
(0606000C)  No intersection
(0606000D)  Point outside device limits
(0606000E)  Illegal instruction
(0606000F)  Unimplemented instruction
(06060010)  Pick interrupt
(06060011)  No further picks
(06060012)  Invalid context range
(06060013)  Illegal single step count
(06060014)  Illegal instance depth
(06060015)  Display context not found
(06060016)  Display break on instance
(06060017)  Display break on return
(06060018)  Illegal break point found
(06060019)  Partial refresh sync error
(0606001A)  Illegal display mode error
(0606001B)  GPU device not present
(0606001C)  Invalid virtual device id
(0606001D)  Unsupported opcode for this machine
(0606001E)  Unsupported execution mode for this machine
(0606001F)  Block size is too small
(06060020)  Unsupported device
(06060021)  Invalid eye distance
(06060022)  Display device error
(06060023)  Illegal operands
(06060024)  Device unavailable
(06060025)  Previous error in display device
(06060026)  Insufficient zbuffer memory
(06060027)  Font file already loaded
(06060028)  Font table full
(06060029)  Bad or improperly formatted font file
(0606002A)  Invalid font id
(0606002B)  Font still referenced
(0606002C)  Unable to rotate this font

            graphics / metafile manager:
(06070001)  Operation invalid
(06070002)  Unable to remap file
(06070003)  No such structure
(06070004)  Invalid in read access mode
(06070005)  Illegal argument
(06070006)  Already initialized
(06070007)  Invalid plane count
(06070008)  Not initialized
(06070009)  Too many files
(0607000A)  No such file
(0607000B)  Invalid file id
(0607000C)  No current file
(0607000D)  No current structure
(0607000E)  Too many points
(0607000F)  Too few points
(06070010)  unused (16)
(06070011)  Viewport does not exist
(06070012)  Illegal value
(06070013)  Viewport bounds invalid
(06070014)  Attribute value invalid
(06070015)  No gmr bitmap exists
(06070016)  Too many viewports
(06070017)  Unable to clear viewport
(06070018)  Viewport id invalid
(06070019)  No current viewport
(0607001A)  Not implemented
(0607001B)  Unable to allocate page
(0607001C)  Unable to initialize file
(0607001D)  Structure not allocated
(0607001E)  Render record not allocated
(0607001F)  Edit record not allocated
(06070020)  Structure body not allocated
(06070021)  Unable to initialize structure tables
(06070022)  Viewport borders too large
(06070023)  Viewport outside ldc limits
(06070024)  Unable to map file
(06070025)  Viewport border outside ldc
(06070026)  Instance not allocated
(06070027)  Tag not allocated
(06070028)  Unimplemented mode
(06070029)  Structure name already used
(0607002A)  Too many structures
(0607002B)  Unable to grow file on open
(0607002C)  Unable to allocate additional space
(0607002D)  Structure size too large to grow
(0607002E)  Unable to allocate element space
(0607002F)  No current element
(06070030)  Invalid for display mode
(06070031)  Input event type invalid
(06070032)  Unable to grow file at edit
(06070033)  Inq element does not match
(06070034)  Color id out of range
(06070035)  Inq array size too small
(06070036)  Structure already open
(06070037)  Aclass id invalid
(06070038)  Ablock id invalid
(06070039)  Too many ablocks
(0607003A)  Text invalid string length
(0607003B)  Text up vector too short
(0607003C)  LDC limits invalid
(0607003D)  File initialization error
(0607003E)  No primary structure
(0607003F)  Too many instances of structure
(06070040)  Ablock not created
(06070041)  Structure header allocation error
(06070042)  Instance record allocation error
(06070043)  Tag record allocation error
(06070044)  Device limits invalid
(06070045)  Returned block too short
(06070046)  Structure move body error
(06070047)  Structure release version error
(06070048)  Instance structure id mismatch error
(06070049)  Structure has no bounds
(0607004A)  Unknown element
(0607004B)  Tag not located
(0607004C)  Intensity out of range
(0607004D)  Element index out of range
(0607004E)  Structure delete error
(0607004F)  Add instance link error
(06070050)  Drop instance link check error
(06070051)  Drop instance backward link error
(06070052)  Drop instance forward link error
(06070053)  Release instance id error
(06070054)  Structure is instanced
(06070055)  Ablock in use
(06070056)  Color model inconsistent
(06070057)  Color range invalid
(06070058)  Valid range is 0 to 1
(06070059)  Unable to copy between files
(0607005A)  File version mismatch
(0607005B)  Odd number of points
(0607005C)  Viewport state version mismatch
(0607005D)  Structure is still open
(0607005E)  Recursive instance
(0607005F)  Invalid view plane normal
(06070060)  Invalid up vector
(06070061)  Invalid hither distance
(06070062)  Clip planes reversed
(06070063)  Information unavailable
(06070064)  Invalid clip zmin
(06070065)  Invalid border width
(06070066)  Locator outside device limits
(06070067)  Locator outside viewport
(06070068)  Invalid normal vector
(06070069)  Matrix is singular
(0607006A)  Zero vector invalid
(0607006B)  Loss of precision
(0607006C)  Replace element zero index
(0607006D)  Point outside viewport
(0607006E)  Invalid window
(0607006F)  Pick index out of range
(06070070)  Element index not found
(06070071)  Instance index lookup failure
(06070072)  No elements in structure
(06070073)  Highlight lookup error
(06070074)  Bounding box highlight only
(06070075)  Highlight block undefined
(06070076)  No highlight defined
(06070077)  Using highlight default ablock
(06070078)  Pick list empty
(06070079)  Pick error
(0607007A)  Path depth out of range
(0607007B)  Highlight out of range
(0607007C)  Instance echo path viewport mismatch
(0607007D)  Illegal instance path length
(0607007E)  Illegal pick aperture size
(0607007F)  Non instance found on path
(06070080)  Dynamic mode incompatible element type
(06070081)  Dynamic mode path viewport mismatch
(06070082)  Dynamic mode already set
(06070083)  Dynamic mode not set
(06070084)  Dynamic mode null element
(06070085)  Dynamic mode edit lock
(06070086)  Bitmap attribute block error
(06070087)  Mark type invalid
(06070088)  Invalid line type
(06070089)  Invalid name set
(0607008A)  Invalid attribute type value
(0607008B)  Invalid attribute source value
(0607008C)  Echoing non primitive
(0607008D)  Graphics Accelerator not present
(0607008E)  Normal in plane of polygon
(0607008F)  Invalid shading mode
(06070090)  Invalid hidden surface mode
(06070091)  Invalid fill style
(06070092)  Invalid bsp id
(06070093)  Bsp file does not exist
(06070094)  Light index out of range
(06070095)  Zbuffer not supported on device
(06070096)  Illegal in dynamic mode
(06070097)  Dynamic mode buffer overflow
(06070098)  Unknown tag type
(06070099)  Polygon decomposition region count exceeded
(0607009A)  Polygon decomposition point count exceeded
(0607009B)  Replaced element not an instance
(0607009C)  Ptext not allocated
(0607009D)  No structure assigned to viewport
(0607009E)  No bsp tree assigned to viewport
(0607009F)  Non-trivial 4th column in matrix
(060700A0)  Light source not enabled
(060700A1)  Wrong light source type
(060700A2)  Wrong structure type
(060700A3)  Points are collinear
(060700A4)  Storage undefined
(060700A5)  Zbuffer not enabled
(060700A6)  Insufficient zbuffer memory
(060700A7)  Internal error with concave polygon
(060700A8)  Relocation failure
(060700A9)  Storage mismatch
(060700AA)  Compactor failure
(060700AB)  Invalid propagation option
(060700AC)  4x4 can't convert to 4x3
(060700AD)  Initial structure size too small
(060700AE)  Initial structure size too large
(060700AF)  Growth rate is too small
(060700B0)  Growth rate is too large
(060700B1)  Growth constant is too small
(060700B2)  Growth constant is too large
(060700B3)  NOP size is too small
(060700B4)  NOP size is too large
(060700B5)  NOP multiple is too small
(060700B6)  NOP multiple is too large
(060700B7)  Invalid font i.d.
(060700B8)  Font i.d. in use
(060700B9)  Obsolete procedure
(060700BA)  unimplemented procedure
(060700BB)  invalid font file
(060700BC)  max fonts in use
(060700BD)  viewport not visible
(060700BE)  viewport is blocked
(060700BF)  illegal buffer option
(060700C0)  buffer limit exceeded
(060700C1)  buffer id outside of range
(060700C2)  too many knots
(060700C3)  too few knots
(060700C4)  no normal specified
(060700C5)  bad crv order
(060700C6)  bad crv min max
(060700C7)  more aux data present
(060700C8)  inconsistent knot values

            graphics / color table manager:
(06080001)  Requested pixel values not available
(06080002)  No RWS available
(06080003)  Requested pixel value not allocated
(06080004)  Current color map is not installed
(06080005)  Color map ID is not valid
(06080006)  Invalid display unit number

            graphics / IDM/RM resource manager:
(06090001)  not an resource ID
(06090002)  resource no longer exists
(06090003)  wrong resource type
(06090004)  non-existent resource
(06090005)  null resource ID
(06090006)  resource in use, only marked for deletion
(06090007)  ?? unused resource manager error code 7 ??
(06090008)  ?? unused resource manager error code 8 ??
(06090009)  bad resource pointer
(0609000A)  null resource pointer
(0609000B)  resources index/pointer mismatch
(0609000C)  attempt to link an already linked resource
(0609000D)  UETLIB version number mismatch
(0609000E)  record length mismatch
(0609000F)  no more RW storage available

            graphics / rectangle manager:
(060A0001)  not a rectangle ID
(060A0002)  rectangle no longer exists
(060A0003)  not a RM ID
(060A0004)  non-existent rectangle
(060A0005)  NULL rectangle ID
(060A0006)  rectangle in use, only marked for deletion
(060A0009)  not a group ID
(060A000A)  group no longer exists
(060A000B)  not a RM group ID
(060A000C)  non-existent group
(060A000D)  NULL group ID
(060A000E)  group in use, only marked for deletion
(060A0011)  rectangle is a root
(060A0012)  rectangles have different roots
(060A0013)  invalid rectangle limits
(060A0014)  WARNING (x,y) not in any sub-rectangle
(060A0015)  (x,y) not in parent or any rectangle
(060A0016)  no such rectangle property key
(060A0017)  null rectangle property key
(060A0018)  caller supplied array too short
(060A0019)  rectangle not acquired
(060A001A)  rectangle not in use
(060A001B)  rectangle already in group
(060A001C)  rectangle not in group
(060A001D)  quit-fault while waiting to acquire
(060A001E)  operation is inconsistent with attributes
(060A001F)  rectangles have different parents
(060A0020)  rectangle operation was deferred
(060A0021)  refresh procedure not in global memory

            graphics / input demultiplexor:
(060B0001)  not an event processor ID
(060B0002)  event processor no longer exists
(060B0003)  wrong IDM resource type
(060B0004)  non-existent event processor
(060B0005)  null event processor ID
(060B0006)  event processor in use, only marked for deletion
(060B0009)  not a focal point ID
(060B000A)  focal point no longer exists
(060B000B)  wrong IDM resource type
(060B000C)  non-existent focal point
(060B000D)  null focal point ID
(060B000E)  event processor in use, only marked for deletion
(060B0011)  not a queue ID
(060B0012)  queue no longer exists
(060B0013)  wrong IDM resource type
(060B0014)  non-existent queue
(060B0015)  null queue ID
(060B0016)  queue in use, only marked for deletion
(060B0019)  not a binding set ID
(060B001A)  binding set no longer exists
(060B001B)  wrong IDM resource type
(060B001C)  non-existent binding set
(060B001D)  null binding set ID
(060B001E)  binnding set in use, only marked for deletion
(060B0021)  bad IDM key
(060B0022)  event processor blocked
(060B0023)  focal point and rectangle not associated
(060B0024)  buffer full
(060B0025)  focal point not active
(060B0026)  binding set array too short
(060B0027)  no such logical device
(060B0028)  bad logical device index
(060B0029)  wrong logical device type
(060B002A)  focal point is not a focus
(060B002B)  event processor not in use
(060B002C)  focal point not in use
(060B002D)  queue not in use
(060B002E)  binding  not in use
(060B002F)  event bindings are not in global memory
(060B0030)  device already borrowed by owner

            graphics / BitMapFile manager:
(060C0001)  Package not initialized
(060C0002)  Invalid x size value
(060C0003)  Invalid y size value
(060C0004)  Invalid file identifier
(060C0005)  Too many files open
(060C0006)  Invalid file length specifier
(060C0007)  Invalid scanline length
(060C0008)  Out of bounds access
(060C0009)  Header size error
(060C000A)  Procedure is obsolete
(060C000B)  Package already initialized
(060C000C)  No zbuffer data area allocated
(060C000D)  Wrong size zbuffer
(060C000E)  Improper window size
(060C000F)  Invalid user data length
(060C0010)  Invalid offset value
(060C0011)  Wrong file format
(060C0012)  No user data allocated
(060C0013)  File is compressed
(060C0014)  File is not compressed
(060C0015)  File format mismatched
(060C0016)  Color map is not allocated
(060C0017)  Invalid color map index
(060C0018)  Too many color map entries
(060C0019)  Illegal color map entries

            graphics / raytracer shell:
(060D0001)  Operation invalid
(060D0002)  Package not initialized
(060D0003)  Matrix is singular
(060D0004)  Zero vector invalid
(060D0005)  Vectors are dependent
(060D0006)  Invalid window parameters
(060D0007)  Invalid view distance value
(060D0008)  Bitmap already exists
(060D0009)  Bitmap does not exist
(060D000A)  Invalid pathname
(060D000B)  Invalid rectangle parameters
(060D000C)  Invalid resolution parameters
(060D000D)  Invalid up-vector value
(060D000E)  Invalid normal-vector value
(060D000F)  Invalid bitmap size
(060D0010)  No object open
(060D0011)  Object not an aggregate
(060D0012)  Too many open objects
(060D0013)  No such object
(060D0014)  No such attribute
(060D0015)  Attribute stack overflow
(060D0016)  No active attribute
(060D0017)  Save-file overflow
(060D0018)  Invalid opcode
(060D0019)  Too many lights

            graphics / raytracer kernel:
(060E0001)  Operation invalid

            graphics / geometry trait:
(060F0001)  Unimplemented trait function
(060F0002)  Scratchpad memory overflow
(060F0003)  Degenerate trimming loop
(060F0004)  Memory management error item not found
(060F0005)  Trimming loop outside support of knots

            graphics / display:
(0610FFFF)  Node does not have a display
(06100001)  Stream is not associated with a display

            graphics / wall-punch handler:
(0611FFFF)  Buffer too small to hold full set of data
(06110001)  Internal error
(06110002)  Invalid impact display unit number
(06110003)  Invalid impact wall selection
(06110004)  Invalid impact coordinates
(06110005)  Invalid exit display unit number
(06110006)  Invalid exit wall selection
(06110007)  Invalid exit coordinates
(06110008)  New entry overlaps existing entry wall-region
(06110009)  Nothing matches the specified coordinates
(0611000A)  Too many entries already in table

            graphics / run-time loader:
(06120001)  operation invalid
(06120002)  too many paths
(06120003)  name not found
(06120004)  global not found
(06120005)  object load failed



            RGYC / Client:
(07010001)  Entry not found
(07010002)  Name already exists
(07010003)  Name is too long
(07010004)  Incompatible program and file versions
(07010005)  No more memory space available
(07010006)  Registry is read-only
(07010007)  Invalid file, internal error
(07010008)  Registry salvage only partially complete
(07010009)  No valid registry found at any registry site
(0701000A)  Name must begin with a lowercase letter
(0701000B)  Cannot delete reserved name
(0701000C)  Unable to access registry at any registry site
(0701000D)  Name contains invalid characters
(0701000E)  Entry already exists
(0701000F)  Operation not yet implemented
(07010010)  Invalid person identifier
(07010011)  Invalid group identifier
(07010012)  Invalid organization identifier
(07010013)  Invalid node identifier
(07010014)  Invalid p.g.o identifier
(07010015)  Operation invalid in specified domain
(07010016)  New password is too short
(07010017)  New password is too long
(07010018)  New password cannot be all spaces
(07010019)  New password cannot be all alphanumeric
(0701001A)  Password incorrect
(0701001B)  Invalid owner

            RGYC / Login:
(07020001)  Shutting down
(07020002)  Exiting
(07020003)  insufficient address space
(07020004)  password does not check
(07020005)  account is invalid or has expired
(07020006)  logins are disabled

            RGYC / Server:
(07030001)  Operation not yet implemented
(07030002)  Unix id changed or incorrect
(07030003)  Object is an alias
(07030004)  Registry server unavailable
(07030005)  Person is not a member of specified group
(07030006)  Person is not a member of specified org
(07030007)  Person is not a member of specified group and org
(07030008)  Incomplete account name
(07030009)  Not authorized to perform operation



            D3M data management / d3mlib:
(08010001)  database not open
(08010002)  dbk for wrong area
(08010003)  database already open
(08010004)  transaction lock request timed out
(08010005)  duplicates error
(08010006)  current unknown
(08010007)  end of set or area
(08010008)  unknown name; not in schema
(08010009)  database open read only or update transaction not in effect
(0801000A)  wrong password
(0801000B)  no disk space
(0801000C)  dbk not available/no good
(0801000D)  unused
(0801000E)  no current of this record type
(0801000F)  set has no optional members
(08010010)  record is  already member
(08010011)  violation of concatenated set integrity
(08010012)  unused
(08010013)  unused
(08010014)  current of rec wrong type
(08010015)  current of rununit of wrong type
(08010016)  record not member in set
(08010017)  record not in area
(08010018)  unused
(08010019)  unused
(0801001A)  no record satisfies record selection
(0801001B)  unused
(0801001C)  area already open
(0801001D)  area not open
(0801001E)  delete set not empty
(0801001F)  internal stack overflow
(08010020)  invalid literal argument
(08010021)  invalid argument
(08010022)  unused
(08010023)  operation cannot be performed within transaction
(08010024)  unused
(08010025)  unused
(08010026)  unused
(08010027)  fatal D3MLIB error
(08010028)  findv requires sorted set
(08010029)  findc requires calced record
(0801002A)  record not indexed
(0801002B)  unused
(0801002C)  improper set mode
(0801002D)  set, record, etc. not in subschema
(0801002E)  unused
(0801002F)  unused
(08010030)  unused
(08010031)  unused
(08010032)  unused
(08010033)  deleted rec referenced
(08010034)  key relation mismatch
(08010035)  HLDML call error
(08010036)  HLDML syntax error
(08010037)  HLDML semantic error
(08010038)  HLDML execution error from D3MLIB
(08010039)  unexpected HLDML execution error
(0801003A)  HLDML internal error
(0801003B)  unused
(0801003C)  unused
(0801003D)  close error
(0801003E)  name not found
(0801003F)  file not found
(08010040)  required resources not available
(08010041)  end of file
(08010042)  wrong object type
(08010043)  unable to open
(08010044)  unused
(08010045)  database must be recovered (use RCVRDB)
(08010046)  loc mode select required in all sets
(08010047)  too many sets in path
(08010048)  multischema inconsistency
(08010049)  distributed DML operation not supported
(0801004A)  dynamic store error
(0801004B)  violation of distributed set integrity
(0801004C)  unused
(0801004D)  unused
(0801004E)  unused
(0801004F)  unused
(08010050)  unused
(08010051)  transaction call err
(08010052)  active transaction required
(08010053)  unused
(08010054)  unused
(08010055)  unused
(08010056)  unused
(08010057)  D3MLIB error
(08010058)  unused
(08010059)  schema/subsch