UM logoNobel Biocare logoNew Projects
Origin of the Center
Implants
Procera®
Literature References
HomeSite MapNobel Biocare Home

New Projects Title
new projects tab  Nobel Biocare/University of Michigan “Center For Excellence”


Implants–Brånemark System–Implants/Abstracts
Finite Element Analysis at the Implant/Bone Interface for One-Piece vs Multi-Unit Implant Systems

Implants–Brånemark System–Abutments/Abstracts
Cement Single Crowns on Osseointegrated Implant After 5 Years: Results from a Prospective Study on CeraOne
A New Brånemark Single Tooth Abutment: Handling and Early Clinical Experiences
Ceramic Implant Abutments Used For Short-Span Fixed Partial Dentures:
A Prospective 2-Year Multicenter Study
Ceramic Implant Abutments Used For Short-Span Fixed Partial Dentures:
A Prospective 5-Year Multicenter Study
Alumina Ceramic Implant Abutments Used For Single-Tooth Replacement:
A Prospective 1- to 3-Year Multicenter Study
AllCeramic Crowns For Single Replacement Implant Abutments
The Effect of the Use of a Counter-torque Device on the Abutment-Implant
Complex

Implants–Brånemark System–Screws/Abstracts
Evaluation of the Interchangeability of Implant Abutment Screws
The Effect of Coefficient of Friction on Preload With a Given Tightening Torque
Determining Preload Contact Force During Abutment-Implant Assembly
Using Ultrasound
Determining Preload Contact Force During Abutment-Implant Assembly
Using FEA

Implants–Replace Select System–Implants/Abstracts
Finite Element Analysis to Determine Implant Preload

Implants–Replace Select System–Abutments/Abstracts
Evaluation of the Precision of Fit Between the Procera Custom Abutment and Various Implant Systems

Implants–Replace Select System–Screws/Abstracts
Finite Element Analysis to Determine Implant Preload
A FEM Evaluation of the Magnitude and Distribution of Preload When
Tightening the Abutment/Implant Joint

Procera–Procera System–Procera Aluminum Oxide Crowns/Abstracts
Maximum Load to Fracture of Various Resin Cements to Densely Sintered
Aluminum Oxide
Effect of Cements on Compressive Strength of Al2O3 Copings
Flexural Strength of Aluminum Oxide Measured by Mechanical Testing and FEM
PROCERA: A New Way to Achieve an All-Ceramic Crown
A New Computer-Assisted Method for Fabrication of Crowns and Fixed PartialDentures
Procera AllCeram Crowns Followed for 5 to 10.5 Years: A Prospective Clinical Study
Surface Alteration of the Procera All-Ceramic Core
Effect of Surface Alteration of the Procera All-Ceramic Core on Cement Bonding
In Vitro Color Stability of Double-Layer Veneers After Accelerated Aging

Procera–Procera System–Procera Zirconia Crowns/Abstracts
Material Strength of Zirconia
Load to Fracture of Veneered Zirconia
Wear of Enamel Opposing YPSZ Zirconia Core Material With Two Surface Finishes

Procera–Procera System–Procera Titanium Implant Bridge/Abstracts
Precision of Fit–Procera® Implant Frameworks
Fit of Implant Framwork Fabricated by Different Techniques
The Effect of Firing Cycles With and Without the Addition of Porcelain on the Fit of a Long-Span Implant Framework
Silane to Enhance the Bond Between Polymethyl Methylmethacrylate and
Titanium
Shear Bond Strength of Metal-Bonding Acrylic Resin to Ti
The Shear Strength of Polymethyl Methylmethacrylate Bonded to Titanium
Partial Denture Framework Material

Procera–Procera System–Procera Titanium Oxide Crowns/Abstracts
Bond Strength of Porcelain to Grade 2 Titanium

 

 

Origin of the Center | Implants | Procera | References | Home
Site Map | Nobel Biocare Home

Copyright © 2001
Last updated: Monday, 17-May-2004 1:33 EST

Up to Top  
 

 

University of Michigan School of Dentistry
Department of Biologic and Materials Sciences
Nobel Biocare/University of Michigan “Center for Excellence”
1011 N. University, Ann Arbor, MI 48109-1078
Tel: 734-763-6680 | Fax: 734-763-3453