Subject: Re: [netatalk-admins] Why does "getzones" time out?
From: Yuji Shinozaki (yuji@physics.unc.edu)
Date: Thu Apr 08 1999 - 09:19:06 EDT
On Thu, 8 Apr 1999, Heinz Nabielek wrote:
> Netatalk is largely working fine
> (see below), but why do I always get
> a time out message from getzones?
>
> X kernel: NET4: AppleTalk 0.18 for Linux NET4.0
> X atalkd[331]: restart (1.4b2+asun2.0a18.2)
> X atalkd[331]: zip_getnetinfo for eth0
> X last message repeated 2 times
> X atalkd[331]: config for no router
^^^^^^^^^^^^^^^^^^^^
Looks like you cannot see an appletalk router and probably do not have a
seed router (an appletalk router that establishes zones). No seed router
=> no zones and nothing to return zone info. Do you see zones in the Mac
Chooser?
You can set up netatalk as a seed router to create zones, but not knowing
your network topology I hesitate to explain how.
yuji
---- Yuji Shinozaki Systems Administrator yuji@physics.unc.edu Dept of Physics and Astronomy http://www.physics.unc.edu Univ. of North Carolina - CH (919)962-7214 (voice) CB 3255 Philips Hall (919)962-0480 (fax) Chapel Hill, NC 27599
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:16:33 EST