Subject: [netatalk-admins] protocol not supported
From: Preston F. Crow (Preston.F.Crow@Dartmouth.EDU)
Date: Sun Jul 18 1999 - 23:01:44 EDT
I used to have netatalk set up and working just fine on another Linux
system with a 2.0.36 kernel, and now I'm trying to do the same with my
current system. I've tried 2.2.x (for various x) and am now running
2.3.11-pre5. With all of these, I find that when atalkd starts up, it
aborts with the following message in my syslog:
setifaddr: eth0: Protocol not supported
I know that my kernel has appletalk configured. I looked at the
atalkd source, and it seems that the problem is an error being
returned from ifconfig() in main.c. I ran it under gdb, and it didn't
seem to report any errors, but it was probably not catching the fork.
A simple test program demonstrates that I can make AF_APPLETALK
sockets.
Running atalkd from strace reveals nothing obvious. (It finds the
config file.)
I did find some references to people with this problem in the archive,
but I didn't locate any solution.
I'm running it as:
atalkd -1
The only non-comment line in my config file is:
eth0
So what could be causing this problem?
--PC
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:16:58 EST