The Replace® Select System implants are produced in both the
external hexagon interface and with the internal connection. Externally-Hexed
(HL) threaded implants with the surface in Etched-Titanium, Hydroxapitite
(HA-Coated), Titanium Plasma Spray (TPS-Coated) and TiUnite,
and Externally-Hexed (HL) cylindrical implants that are HA-Coated,
TPS-Coated and TiUnite are available.
The Replace® Select System also provides Non-Hexed threaded
implants in Etched-Titanium, HA-Coated and TiUnite surfaces.
The Non-Hexed cylindrical implants are available in HA-Coated, TPS-Coatedand
TiUnite surfaces.
The abutment selections for both the Externally-Hexed (HL) and
the Non-Hexed implants are organized according to the method by
which the prosthetic will be retained. Abutments are available for
Cement-Retained, Screw-Retained and Bar-Retained or Abutment-Retained
restorations.
The implants are produced in lengths that vary from 8.0 mm to 18.0
mm depending on the implant form selected. The implants are produced
in widths of 3.25 mm, 3.8 mm, 4.5 mm, 5.0 mm and 6.0 mm.
The Replace® Select System provides the clinician with a variety
of options to accommodate different surgical sites and provide optimal
restorative versatility. The external hex for the Replace implant
is 1.0 mm tall. The system is color-coded to match diameters of
the implants. Studies have been conducted by the Center that
involve the Replace® Select System.
|